Page All:
Page 1
Epson and Plastic Logic Announce Cooperation at electronica 2012
MUNICH and DRESDEN, Germany, November 12, 2012 /PRNewswire/ --
Leaders in their respective fields cooperate to broaden
the applications for flexible plastic displays
Epson Europe Electronics GmbH will present a controller/driver developed for Plastic
Logic's innovative flexible plastic displays at electronica 2012 in Munich. The
collaboration between the two companies has allowed optimisation of performance targeted
at displays between 1 and 5 size.
The Epson controller/driver S1D13541 for electrophoretic displays (EPD) combines all
of the fundamental components for controlling an EPD on one single module. The S1D13541
contains an EPD controller with four display pipelines, which can be used in parallel to
represent up to 16 levels of grey. Furthermore, it contains 480 TFT source driver outputs
as well as a built-in memory and supports display resolutions up to 480 x 854 pixels. The
module also integrates a waveform memory, a DC/DC booster circuit (optional usage) for the
generation of all required display voltages, as well as a temperature sensor.
In combination with an external TFT gate driver, the S1D13541 forms an ideal system,
allowing this new display technology from Plastic Logic to be used in a broad range of
applications, including healthcare and automotive applications, as well as in mobile
devices and smart cards.
Plastic Logic has developed a flexible plastic display technology using organic thin
film transistors (OTFT) http://www.plasticlogic.com/technology. The use of a plastic
substrate instead of glass enables completely new applications and products. As a result,
Plastic Logic can manufacture flexible plastic EPDs (monochrome and colour) in various
sizes (from 1 to 20 ), which are extremely light, ultra-thin, particularly robust and
very low power. These displays can be manufactured with thicknesses considerably thinner
than 400 microm and with a bendability radius of at least 15 mm.
Dr. Peter Fischer, CTO at Plastic Logic explained: "Plastic Logic's versatile display
solutions are all based on plastic and offer our customers the ability to improve their
applications, as well as develop completely new products: from a wristband with an
integrated flexible display to large area signage. We are delighted to announce the
partnership between Epson and Plastic Logic, which has led to the development of a
solution focused on our flexible plastic display sizes in the range of one to five inches
and based on Epson's EPD controller S1D13541. This will offer great advantages for various
applications, including mobile devices and will allow the freedom for new product design
approaches."
"In recent years Epson has concentrated its development in particular on the
development of unique EPD controllers for eBook customers. Our next objective is to expand
our product range to also include industrial and other promising new applications," stated
Manfred Wittmeir, IC Department Manager at Epson Europe Electronics. "Electrophoretic
displays based on the S1D13541 module are the ideal solution for any customer wanting to
develop EPD based applications in a simple way and without the necessity for a complex
technical learning process."
Epson Europe Electronics GmbH will showcase the first display samples based on its
cooperation with Plastic Logic at electronica 2012 in Munich (13-16 November) in hall A4,
stand 224.
About Epson Europe Electronics GmbH
Epson Europe Electronics GmbH is a marketing, engineering and sales company and the
European Headquarters for electronic devices of the Seiko Epson Corporation, Japan.
Headquartered in Munich/Germany since 1989 with 60 employees, Epson Europe Electronics
GmbH has several European sales representatives and has a European-wide network of
distributors.
Epson Europe Electronics provides value added services for semiconductors and quartz
devices targeted to the mobile communication, automotive and home visual market. Epson
products are recognised for energy saving, low power, small form factors and rapid time to
market. Information about Epson Europe Electronics GmbH is available on the Internet under
http://www.epson-electronics.de
About Plastic Logic
Since Plastic Logic was founded by researchers from the Cavendish Laboratory at
Cambridge University, the company has been at the forefront of research and investment
into plastic electronics. The company has achieved many technological firsts including the
production of high quality colour rugged plastic displays, demonstration of animation on
an EPD driven by OTFTs and production yields of its flexible plastic displays comparable
to the LCD industry.
Plastic Logic is backed by major investors including Oak Investment Partners and
Rusnano. Find out more about Plastic Logic and its robust, flexible displays by visiting
http://www.plasticlogic.com and http://www.youtube.com/plasticlogic.
Companies interested in working together with Plastic Logic should contact
info@plasticlogic.com.
Epson Europe Electronics GmbH and Plastic Logic
CONTACT: Media Contact at Plastic Logic: Rachel Lichten, Business Communications Manager, An der Bartlake 5, 01109 Dresden, Tel.: +49-351-88344-120, Fax: +49-351-88344-100, Email: rachel.lichten@plasticlogic.com
Epson and Plastic Logic Announce Cooperation at electronica 2012
MUNICH and DRESDEN, Germany, November 12, 2012 /PRNewswire/ --
Leaders in their respective fields cooperate to broaden
the applications for flexible plastic displays
Epson Europe Electronics GmbH will present a controller/driver developed for Plastic
Logic's innovative flexible plastic displays at electronica 2012 in Munich. The
collaboration between the two companies has allowed optimisation of performance targeted
at displays between 1 and 5 size.
The Epson controller/driver S1D13541 for electrophoretic displays (EPD) combines all
of the fundamental components for controlling an EPD on one single module. The S1D13541
contains an EPD controller with four display pipelines, which can be used in parallel to
represent up to 16 levels of grey. Furthermore, it contains 480 TFT source driver outputs
as well as a built-in memory and supports display resolutions up to 480 x 854 pixels. The
module also integrates a waveform memory, a DC/DC booster circuit (optional usage) for the
generation of all required display voltages, as well as a temperature sensor.
In combination with an external TFT gate driver, the S1D13541 forms an ideal system,
allowing this new display technology from Plastic Logic to be used in a broad range of
applications, including healthcare and automotive applications, as well as in mobile
devices and smart cards.
Plastic Logic has developed a flexible plastic display technology using organic thin
film transistors (OTFT) http://www.plasticlogic.com/technology. The use of a plastic
substrate instead of glass enables completely new applications and products. As a result,
Plastic Logic can manufacture flexible plastic EPDs (monochrome and colour) in various
sizes (from 1 to 20 ), which are extremely light, ultra-thin, particularly robust and
very low power. These displays can be manufactured with thicknesses considerably thinner
than 400 microm and with a bendability radius of at least 15 mm.
Dr. Peter Fischer, CTO at Plastic Logic explained: "Plastic Logic's versatile display
solutions are all based on plastic and offer our customers the ability to improve their
applications, as well as develop completely new products: from a wristband with an
integrated flexible display to large area signage. We are delighted to announce the
partnership between Epson and Plastic Logic, which has led to the development of a
solution focused on our flexible plastic display sizes in the range of one to five inches
and based on Epson's EPD controller S1D13541. This will offer great advantages for various
applications, including mobile devices and will allow the freedom for new product design
approaches."
"In recent years Epson has concentrated its development in particular on the
development of unique EPD controllers for eBook customers. Our next objective is to expand
our product range to also include industrial and other promising new applications," stated
Manfred Wittmeir, IC Department Manager at Epson Europe Electronics. "Electrophoretic
displays based on the S1D13541 module are the ideal solution for any customer wanting to
develop EPD based applications in a simple way and without the necessity for a complex
technical learning process."
Epson Europe Electronics GmbH will showcase the first display samples based on its
cooperation with Plastic Logic at electronica 2012 in Munich (13-16 November) in hall A4,
stand 224.
About Epson Europe Electronics GmbH
Epson Europe Electronics GmbH is a marketing, engineering and sales company and the
European Headquarters for electronic devices of the Seiko Epson Corporation, Japan.
Headquartered in Munich/Germany since 1989 with 60 employees, Epson Europe Electronics
GmbH has several European sales representatives and has a European-wide network of
distributors.
Epson Europe Electronics provides value added services for semiconductors and quartz
devices targeted to the mobile communication, automotive and home visual market. Epson
products are recognised for energy saving, low power, small form factors and rapid time to
market. Information about Epson Europe Electronics GmbH is available on the Internet under
http://www.epson-electronics.de
About Plastic Logic
Since Plastic Logic was founded by researchers from the Cavendish Laboratory at
Cambridge University, the company has been at the forefront of research and investment
into plastic electronics. The company has achieved many technological firsts including the
production of high quality colour rugged plastic displays, demonstration of animation on
an EPD driven by OTFTs and production yields of its flexible plastic displays comparable
to the LCD industry.
Plastic Logic is backed by major investors including Oak Investment Partners and
Rusnano. Find out more about Plastic Logic and its robust, flexible displays by visiting
http://www.plasticlogic.com and http://www.youtube.com/plasticlogic.
Companies interested in working together with Plastic Logic should contact
info@plasticlogic.com.
Epson Europe Electronics GmbH and Plastic Logic
CONTACT: Media Contact at Plastic Logic: Rachel Lichten, Business Communications Manager, An der Bartlake 5, 01109 Dresden, Tel.: +49-351-88344-120, Fax: +49-351-88344-100, Email: rachel.lichten@plasticlogic.com