=?ISO-8859-1?Q?3.3V/5V_20Mbps_RS-485_Transceiver_Family_Provides_=B1_?= =?ISO-8859-1?Q?60V_Fault_Protection_for_Improved_System_Reliability?=
Poster: SySAdmin
Posted on February 10, 2016 at 8:56:01 AM
3.3V/5V 20Mbps RS-485 Transceiver Family Provides ± 60V Fault Protection for Improved System Reliability
FREMONT, Calif., Feb. 10, 2016 /PRNewswire/ -- Exar Corporation (NYSE: EXAR), a leading supplier of analog mixed-signal products serving the industrial, high-end consumer and infrastructure markets, introduces a new family of +60V fault protected RS-485/RS-422 (TIA-485/TIA-422) transceivers able to withstand direct shorts and achieve overvoltage protection with no external components. Designed for improved performance in noisy industrial environments and increased tolerance to system faults, these transceivers simplify design in building automation, HVAC networks, energy metering, process control and other industrial automation applications.
At initial launch, the family includes four parts: XR33053, XR33152, XR33156 and XR33158. The XR33156 is the most feature-rich ±60V tolerant device on the market with cable invert control to correct for reversed bus pins and a low voltage logic pin, eliminating the need for a level shifter in low voltage applications. Other inherent protection features include +25V common mode voltage, hot swap glitch protection, overload protection and enhanced receiver fail-safe protection for open, shorted or terminated but idle data lines.
"These transceivers protect against wiring faults up to ±60V and simultaneously protect against ESD events exceeding +15kV," said Dale Wedel, Exar's vice president, analog products. "This family is a welcome addition to Exar's rich portfolio of serial transceiver products and enhances our excellent support to our broad industrial customer base."
The XR33053, XR33152, XR33156 and XR33158 operate over a wide 3V to 5.5V supply voltage range and feature the industry's lowest standby current of 1uA (max), 1nA (typ). They support data rates up to 20Mbps in either full- or half-duplex configurations, exceed +15kV ESD protection on the bus pins and operate over the standard industrial temperature range of -40C to 85C.
Specified over the standard industrial temperature range of -40C to 85C, the XR33053, XR33152, XR33156 and XR33158 are offered in RoHS compliant, green/halogen free, SOIC-8 and SOIC-14 packages. 1,000-piece pricing starts at $1.49 each. For more information, visit http://www.exar.com/60Vtransceivers. Evaluation boards and samples are available at http://www.exar.com/connectivity/transceiver/#rs485.
Summary of features:
-- Wide 3.0V to 5.5V supply operation
-- +60V fault tolerance on analog bus pins
-- Extended ±25V common mode operation
-- 1.65V to 5.5V I/O logic interface V(L) pin (XR33156)
-- <1uA (max) standby current
-- 20Mbps maximum data rate
-- Robust ESD (Electrostatic Discharge) protection for RS-485 bus pins
About Exar
Exar Corporation designs, develops and markets analog mixed-signal products for the industrial and embedded systems communications, high-end consumer and infrastructure markets. Exar's broad product portfolio includes power management, signal conditioning, interface, display, data management and video processing solutions. Exar has locations worldwide providing real-time customer support. For more information, visit http://www.exar.com.
Exar, XR, the Exar logo are registered trademarks and PowerArchitect is a trademark of Exar Corp. All other trademarks are the property of their respective owners.
SOURCE Exar Corporation
Exar Corporation
CONTACT: Rhoeda Farolan, Senior Manager, Corporate Marketing, 510-668-7000, press@exar.com, Bob Jones/Derek Rye, Publitek, North America: 408-786-5151, Europe: +44 1225 470000, exar@publitek.com
Web Site: http://www.exar.com
FREMONT, Calif., Feb. 10, 2016 /PRNewswire/ -- Exar Corporation (NYSE: EXAR), a leading supplier of analog mixed-signal products serving the industrial, high-end consumer and infrastructure markets, introduces a new family of +60V fault protected RS-485/RS-422 (TIA-485/TIA-422) transceivers able to withstand direct shorts and achieve overvoltage protection with no external components. Designed for improved performance in noisy industrial environments and increased tolerance to system faults, these transceivers simplify design in building automation, HVAC networks, energy metering, process control and other industrial automation applications.
At initial launch, the family includes four parts: XR33053, XR33152, XR33156 and XR33158. The XR33156 is the most feature-rich ±60V tolerant device on the market with cable invert control to correct for reversed bus pins and a low voltage logic pin, eliminating the need for a level shifter in low voltage applications. Other inherent protection features include +25V common mode voltage, hot swap glitch protection, overload protection and enhanced receiver fail-safe protection for open, shorted or terminated but idle data lines.
"These transceivers protect against wiring faults up to ±60V and simultaneously protect against ESD events exceeding +15kV," said Dale Wedel, Exar's vice president, analog products. "This family is a welcome addition to Exar's rich portfolio of serial transceiver products and enhances our excellent support to our broad industrial customer base."
The XR33053, XR33152, XR33156 and XR33158 operate over a wide 3V to 5.5V supply voltage range and feature the industry's lowest standby current of 1uA (max), 1nA (typ). They support data rates up to 20Mbps in either full- or half-duplex configurations, exceed +15kV ESD protection on the bus pins and operate over the standard industrial temperature range of -40C to 85C.
Specified over the standard industrial temperature range of -40C to 85C, the XR33053, XR33152, XR33156 and XR33158 are offered in RoHS compliant, green/halogen free, SOIC-8 and SOIC-14 packages. 1,000-piece pricing starts at $1.49 each. For more information, visit http://www.exar.com/60Vtransceivers. Evaluation boards and samples are available at http://www.exar.com/connectivity/transceiver/#rs485.
Summary of features:
-- Wide 3.0V to 5.5V supply operation
-- +60V fault tolerance on analog bus pins
-- Extended ±25V common mode operation
-- 1.65V to 5.5V I/O logic interface V(L) pin (XR33156)
-- <1uA (max) standby current
-- 20Mbps maximum data rate
-- Robust ESD (Electrostatic Discharge) protection for RS-485 bus pins
About Exar
Exar Corporation designs, develops and markets analog mixed-signal products for the industrial and embedded systems communications, high-end consumer and infrastructure markets. Exar's broad product portfolio includes power management, signal conditioning, interface, display, data management and video processing solutions. Exar has locations worldwide providing real-time customer support. For more information, visit http://www.exar.com.
Exar, XR, the Exar logo are registered trademarks and PowerArchitect is a trademark of Exar Corp. All other trademarks are the property of their respective owners.
SOURCE Exar Corporation
Exar Corporation
CONTACT: Rhoeda Farolan, Senior Manager, Corporate Marketing, 510-668-7000, press@exar.com, Bob Jones/Derek Rye, Publitek, North America: 408-786-5151, Europe: +44 1225 470000, exar@publitek.com
Web Site: http://www.exar.com