CEVA and NextG-Com Partner to offer Integrated LTE Cat-M1 and Cat-NB1 Solutions for Cost-Sensitive IoT applications
Poster: SySAdmin
Posted on November 17, 2016 at 7:14:01 AM
CEVA and NextG-Com Partner to offer Integrated LTE Cat-M1 and Cat-NB1 Solutions for Cost-Sensitive IoT applications
Solutions integrate CEVA-X1 IoT processor together with ALPSLite-M / ALPSLite-NB protocol stacks for ultra-low-power, low-cost cellular IoT devices
MOUNTAIN VIEW, Calif., Nov. 17, 2016 /PRNewswire/ -- CEVA, Inc. (NASDAQ: CEVA), the leading licensor of signal processing IPs for smarter, connected devices, and NextG-Com Limited (NextG-Com), today introduced two pre-integrated narrowband LTE solutions designed to simplify the development of Cat-M1 and Cat-NB1 (NB-IoT) modems for cost-sensitive Internet of Things (IoT) applications.
The solutions incorporate the recently introduced CEVA-X1 single-core IoT processor together with NextG-Com's ALPSLite-M Cat-M1 or ALPSLite-NB Cat-NB1 protocol stacks, in a highly compact and power-efficient manner. Addressing the cost-sensitive nature of cellular IoT devices, the CEVA-X1 is capable of handling the full DSP and CPU processing loads for these modems, eliminating the requirement for a CPU controller in the system. Furthermore, the solutions have been carefully optimized to ensure smallest memory footprint, minimizing the requirements for costly embedded flash and static RAM. Ensuring maximum power efficiency for long life cellular IoT applications such as asset trackers or smart meters, the CEVA-X1 incorporates dedicated NB-IoT instructions, allowing it to operate at a clock speed of less than 100MHz for a complete Cat-NB1 solution.
"Cellular IoT offers huge potential in terms of the breadth of applications it will enable and the massive global scale on which these devices can be deployed," said Denis Bidinost, Chief Executive Officer of NextG-Com. "Our partnership with CEVA brings together their dedicated IoT processor with fully-optimized implementations of our Cat-M1 and Cat-NB1 protocol stacks to significantly simplify the integration of narrowband LTE connectivity into cost-sensitive, power-optimized IoT product designs."
"At CEVA, we're at the forefront of LTE and 5G modem innovation, and the only end-to-end DSP supplier for cellular in the industry today, said Michael Boukaya, vice president and general manager, Wireless Business Unit at CEVA. "With the recent introduction of our single-core CEVA-X1 IoT processor, we leveraged this expertise to address the cellular IoT space and help drive this technology forward. Together with NextG-Com, we can offer our customers pre-integrated, dedicated solutions for low data rate LTE connectivity in any IoT device, from asset trackers through to wearalone wearables."
CEVA and NextG-Com will present the complete Cat-M1 and Cat-NB1 solutions at the CEVA Technology Symposium, November 21st in Hsinchu, Taiwan, November 23rd in Shenzhen, China and November 25th, in Shanghai, China. For more information, visit http://events.ceva-dsp.com/symposium-2016/.
About NextG-Com
NextG-Com Limited is a UK based independent technology development company specialising in software services and embedded system components for LTE, satellite and M2M solutions. With a proven record of delivery, we provide our global Tier1 semiconductor partners, modem and device developers with protocol stack design services and full life-cycle software support, from requirements/feasibility study through to interoperability and live network testing.
Further details can be viewed at http://www.nextgcom.co.uk
About CEVA, Inc.
CEVA is the leading licensor of signal processing IP for a smarter, connected world. We partner with semiconductor companies and OEMs worldwide to create power-efficient, intelligent and connected devices for a range of end markets, including mobile, consumer, automotive, industrial and IoT. Our ultra-low-power IPs for vision, audio, communications and connectivity include comprehensive DSP-based platforms for LTE/LTE-A/5G baseband processing in handsets, infrastructure and machine-to-machine devices, computer vision and computational photography for any camera-enabled device, audio/voice/speech and ultra-low power always-on/sensing applications for multiple IoT markets. For connectivity, we offer the industry's most widely adopted IPs for Bluetooth (low energy and dual mode), Wi-Fi (802.11 a/b/g/n/ac up to 4x4) and serial storage (SATA and SAS). Visit us at http://www.ceva-dsp.com and follow us on Twitter, YouTube and LinkedIn.
Logo - http://photos.prnewswire.com/prnh/20120808/SF53702LOGO
SOURCE CEVA, Inc.
Photo:http://photos.prnewswire.com/prnh/20120808/SF53702LOGO
http://photoarchive.ap.org/
CEVA, Inc.
CONTACT: CEVA: Richard Kingston, CEVA, Inc., 650-417-7976, richard.kingston@ceva-dsp.com; Publitek (Pinnacle Division), Simon Flatt, +44 20 8869 9229, simon.flatt@publitek.com
Web Site: http://www.ceva-dsp.com
Solutions integrate CEVA-X1 IoT processor together with ALPSLite-M / ALPSLite-NB protocol stacks for ultra-low-power, low-cost cellular IoT devices
MOUNTAIN VIEW, Calif., Nov. 17, 2016 /PRNewswire/ -- CEVA, Inc. (NASDAQ: CEVA), the leading licensor of signal processing IPs for smarter, connected devices, and NextG-Com Limited (NextG-Com), today introduced two pre-integrated narrowband LTE solutions designed to simplify the development of Cat-M1 and Cat-NB1 (NB-IoT) modems for cost-sensitive Internet of Things (IoT) applications.
The solutions incorporate the recently introduced CEVA-X1 single-core IoT processor together with NextG-Com's ALPSLite-M Cat-M1 or ALPSLite-NB Cat-NB1 protocol stacks, in a highly compact and power-efficient manner. Addressing the cost-sensitive nature of cellular IoT devices, the CEVA-X1 is capable of handling the full DSP and CPU processing loads for these modems, eliminating the requirement for a CPU controller in the system. Furthermore, the solutions have been carefully optimized to ensure smallest memory footprint, minimizing the requirements for costly embedded flash and static RAM. Ensuring maximum power efficiency for long life cellular IoT applications such as asset trackers or smart meters, the CEVA-X1 incorporates dedicated NB-IoT instructions, allowing it to operate at a clock speed of less than 100MHz for a complete Cat-NB1 solution.
"Cellular IoT offers huge potential in terms of the breadth of applications it will enable and the massive global scale on which these devices can be deployed," said Denis Bidinost, Chief Executive Officer of NextG-Com. "Our partnership with CEVA brings together their dedicated IoT processor with fully-optimized implementations of our Cat-M1 and Cat-NB1 protocol stacks to significantly simplify the integration of narrowband LTE connectivity into cost-sensitive, power-optimized IoT product designs."
"At CEVA, we're at the forefront of LTE and 5G modem innovation, and the only end-to-end DSP supplier for cellular in the industry today, said Michael Boukaya, vice president and general manager, Wireless Business Unit at CEVA. "With the recent introduction of our single-core CEVA-X1 IoT processor, we leveraged this expertise to address the cellular IoT space and help drive this technology forward. Together with NextG-Com, we can offer our customers pre-integrated, dedicated solutions for low data rate LTE connectivity in any IoT device, from asset trackers through to wearalone wearables."
CEVA and NextG-Com will present the complete Cat-M1 and Cat-NB1 solutions at the CEVA Technology Symposium, November 21st in Hsinchu, Taiwan, November 23rd in Shenzhen, China and November 25th, in Shanghai, China. For more information, visit http://events.ceva-dsp.com/symposium-2016/.
About NextG-Com
NextG-Com Limited is a UK based independent technology development company specialising in software services and embedded system components for LTE, satellite and M2M solutions. With a proven record of delivery, we provide our global Tier1 semiconductor partners, modem and device developers with protocol stack design services and full life-cycle software support, from requirements/feasibility study through to interoperability and live network testing.
Further details can be viewed at http://www.nextgcom.co.uk
About CEVA, Inc.
CEVA is the leading licensor of signal processing IP for a smarter, connected world. We partner with semiconductor companies and OEMs worldwide to create power-efficient, intelligent and connected devices for a range of end markets, including mobile, consumer, automotive, industrial and IoT. Our ultra-low-power IPs for vision, audio, communications and connectivity include comprehensive DSP-based platforms for LTE/LTE-A/5G baseband processing in handsets, infrastructure and machine-to-machine devices, computer vision and computational photography for any camera-enabled device, audio/voice/speech and ultra-low power always-on/sensing applications for multiple IoT markets. For connectivity, we offer the industry's most widely adopted IPs for Bluetooth (low energy and dual mode), Wi-Fi (802.11 a/b/g/n/ac up to 4x4) and serial storage (SATA and SAS). Visit us at http://www.ceva-dsp.com and follow us on Twitter, YouTube and LinkedIn.
Logo - http://photos.prnewswire.com/prnh/20120808/SF53702LOGO
SOURCE CEVA, Inc.
Photo:http://photos.prnewswire.com/prnh/20120808/SF53702LOGO
http://photoarchive.ap.org/
CEVA, Inc.
CONTACT: CEVA: Richard Kingston, CEVA, Inc., 650-417-7976, richard.kingston@ceva-dsp.com; Publitek (Pinnacle Division), Simon Flatt, +44 20 8869 9229, simon.flatt@publitek.com
Web Site: http://www.ceva-dsp.com