News

Synaptics Announces World's First Match-in-Sensor Fingerprint Authentication Technology

Unmatched Security Enhancement Driven by Secure Mobile Transaction Growth, Password Burdens

SAN JOSE, Calif., July 9, 2015 /PRNewswire/ -- Synaptics Inc. (NASDAQ: SYNA), the leading developer of human interface solutions, today announced a new Match-in-Sensor(TM) fingerprint authentication technology, the industry's first fully hardware encapsulated fingerprint sensor and matching solution. Synaptics' innovative Match-in-Sensor secure authentication technology is literally off the grid, isolating fingerprint image enrollment, pattern storage and biometric matching within the fingerprint sensor to provide ultimate protection against on-device threats.

Synaptics' Match-in-Sensor solution includes a System on Chip (SoC) architecture in which a single device performs both input/output functions with an in-sensor microprocessor executing firmware. By performing security sensitive functions completely inside the SoC, Match-in-Sensor adds a new level of security due to total isolation from the host operating system. Alternative authentication via Match-on-Host is less secure because fingerprint data can be communicated with the host processor, which opens up opportunities for hardware attacks and system malware.

Growth in a password-free ecosystem leads to increased convenience for end-users by providing authentication that is far superior and easier to use than passwords. With password-less convenience and consumer financial transactions leading the way, other secure transactions will be enabled including sharing of private authenticated information and access to SAS software or other consumer and enterprise applications.

"The entire mobile payments ecosystem, driven by rapid adoption of fingerprint authentication technology, is increasingly concerned about reducing security risks and eliminating threats of attack," said Ritu Favre, senior vice president and general manager, Biometric Products Division (BPD), Synaptics. "Match-in-Sensor technology provides for the requirements of smartphone manufacturers, the convenience for end-users, and the security for online service providers when authenticating their customers."

"With the proliferation of mobile payments, security on mobile devices has taken on a much more significant meaning. Synaptics' Match-in-Sensor raises the bar on security by ensuring that your biometric information never leaves the sensor compared to Match-on-Host or Match-on-Host-Trusted Zone solutions. This is especially useful if the host system is compromised by malware or a virus," said Les Santiago, Research Director for IDC.

Availability
Match-in-Sensor is sampling today with key OEMs.

About Synaptics:
Synaptics is the pioneer and leader of the human interface revolution, bringing innovative and intuitive user experiences to intelligent devices. Synaptics' broad portfolio of touch, display, and biometrics products is built on the company's rich R&D and supply chain capabilities. With solutions designed for mobile, PC and automotive industries, Synaptics combines ease of use, functionality and aesthetics to enable products that help make our digital lives more productive, secure and enjoyable. (NASDAQ: SYNA) http://www.synaptics.com.

Follow Synaptics on Twitter and LinkedIn, or visit synaptics.com.

Synaptics, Match-in-Sensor and the Synaptics logo are trademarks of Synaptics in the United States and/or other countries. All other marks are the property of their respective owners.

For further information, please contact:
David Hurd, Synaptics Incorporated
+1-408-904-2766
david.hurd@synaptics.com

Public Relations:
Text 100 Global Communications
Marcelo Vilela
+1-415-593-8419
synaptics@text100.com

SOURCE  Synaptics Inc.

Synaptics Inc.

Web Site: http://www.synaptics.com

Lumi Launches Meetoo to Revolutionise Meetings Through Live Polling and Messaging

LONDON, July 9, 2015 /PRNewswire/ --

    - Meetoo will save companies time and money as live polling allows instant
decision-making - 

    - The cloud-based app will empower staff, making it possible for every employee to
participate - 

    - The option to share opinions and comments anonymously promotes more honest feedback
-  

    Lumi, the leader in real-time audience insight technology and solutions, today
announces the launch of Meetoo, a real-time polling and messaging app that enables
collaboration from any location on any device. The new app is set to revolutionise
meetings by providing a cloud-based platform that makes it easy for every attendee to
participate, including the ability to share feedback anonymously.

         (Photo:
http://photos.prnewswire.com/prnh/20150708/234320 )

    Meetoo is the first app of its kind to provide real-time polling and messaging in
meetings of 1,000 participants or more anywhere in the world, enabling them to communicate,
collaborate and make instant decisions. Meetoo can be used in a number of scenarios,
including internal meetings, virtual meetings, town halls, training sessions, classroom
lectures, corporate meetings and multi-location meetings. Attendees can access Meetoo from
any iOS or Android device, or use the mobile web on any web-enabled phone, tablet or
computer.

    Marking the end of traditional, one-way meetings with disengaged attendees, the global
adoption of smartphones and Wi-Fi provided the opportunity to create a collaborative
platform. Lumi's new interactive meeting software is designed to allow organisers to gauge
audience sentiment, answer questions or concerns and encourage colleague participation. It
has already been successfully used by big international corporations such as PwC to help
empower their workforce, brainstorm ideas and develop strategy.

    Some of the key features of Meetoo include:

       
        - Live polling: create questions on-the-fly and collect immediate results allowing
          organisers to measure understanding and get answers that aid decision-making
        - Group chat: participants can share ideas, 'like' comments and communicate with each
          other through group messaging-saving time and the need for follow-up meetings
        - Moderation: ensures conversations remain on-topic to allow constructive outcomes and
          efficient use of company time
        - Q&A forum: outlet for participants from any location to ask questions-anonymously or
          using their identity-without embarrassment or the need to interrupt audio
        - PowerPoint add-in: presenters can create questions and poll attendees in the moment
          during their presentation, making it easy to adapt to the needs of the meeting
        - Multi-party access: join up to 1,000 people or more from across the globe in a single
          meeting
        - Immediate reporting: full meeting data and narrative (including live polling results
          and participant messages) in a simple Excel feedback report

    Speaking about Meetoo, CEO of Lumi, Richard Taylor, commented: "I am incredibly
excited about the launch of Meetoo. I am sure many will recognise the scenario of being on
a frustrating call or webinar where there are too many participants to use audio
effectively so everyone has to mute. What should be a multi-way interactive discussion
then becomes a one-way broadcast. Meetoo enables people in disparate locations to feel as
if they are a part of the same meeting, allowing everyone to get involved in a way that is
manageable for the meeting organiser or presenter. It's a great way to make a large
meeting feel more like an effective small meeting.

    "We have first-hand experience incorporating interactive technologies in the 3,000+
conferences we support every year. Now with the launch of Meetoo, we aim to improve the
millions of meetings that occur every day. We have already trialled Meetoo with a number
of international companies with great success. Customers were able to set up an online
account in minutes and run the platform entirely themselves."

    Meint Waterlander, spokesman at PwC, commented, "We weren't sure what to expect with
Meetoo and were surprised by how interactive and exciting it made our meeting. Meetoo
enabled over 1,100 PwC employees to participate during the meeting through live polling
and messaging. Without Meetoo, it would have been impossible for us to collect and
respond-in the moment-to the hundreds of comments and questions we received from
attendees."

    About Lumi       

    Lumi is a global market leader in real-time audience insight technology for research,
live events, meetings and corporate communication. Operating from offices in twelve
countries, Lumi's core technologies and engaging mobile apps are used by hundreds of
multinational corporations and their advisers to provide an unparalleled understanding of
attitudes, opinion and behaviour in a dynamic and innovative way.
http://www.lumiinsight.com [http://www.lumimobile.com ]

    Meetoo is available to trial for free at http://meetoo.io

    For any queries, please contact 

    Chris Lane / Nicola Krafft, FTI Consulting: +44(0)20-3727-1000

    Photo:
    http://photos.prnewswire.com/prnh/20150708/234320

Photo:http://photos.prnewswire.com/prnh/20150708/234320
http://photoarchive.ap.org/
Lumi

Fast-charging Battery GOOLOO Quank Charges Fully In 15 Minutes

SHENZHEN, China, July 9, 2015 /PRNewswire/ -- The global community was awe-struck today as a group of GOOLOO professionals and specialists in the production and trade of external batteries for vehicles and other digital gadgets, and R&D announced the launch of GOOLOO Quank, the Fastest Charging Battery Pack. 

http://photos.prnewswire.com/prnvar/20150708/233803

It can be charged at 140 watts, and within just 3 minutes of charging, will have enough power for a full iPhone 6 charge, and within 7 minutes, enough power for a Samsung Galaxy S6. It only needs 15 minutes for a full charge, which is 15 to 30 times quicker than standard power bank battery packs. This compact power bank provides an industry-leading 5V/2A of output for accelerated on-the-go charging and battery maintenance, weighs 8.5 ounces as well as measuring 5.3 x 2.3 x 0.9 inches, uses an incredible 4500mAh high quality and high power battery and has multiple safety protection design. It is slim, sleek, portable and enhances convenience during travels. With this new device, you'll never have to spend a ton of time charging an external battery pack. You can now enjoy uninterrupted hours of gaming, fun and other stuff on your gadgets.

The good news is, GOOLOO Quank is now available on Amazon marketplace. You cannot afford to miss out. GOOLOO is a thriving company built on the foundational principles of integrity and optimum service delivery. Their trust and confidence in the durability of their products is why they are offering an 18-month warranty. That is an amazing offer only few manufacturing companies can give.

Speaking on their second-to-none achievement in the innovation and implementation of the charging device, the Product Director, David of GOOLOO said, "We are delighted to be able to finally announce the innovation and evolution of this great charging device after a lot of hard work and dedication from our professionals. It has always been our dream to design, innovate and implement the quickest, safest, most reliable and dependable charging solution to the global community. Next, we will produce the large-capacity Quank.The next generation battery pack is coming. Our customers deserve an excellent, affordable as well as efficient on the-road charging experience. We are proud of these products and are sure that our customers will be too."

Official website: http://www.gooloobox.com

Facebook: https://www.facebook.com/gooloofans

Twitter:: https://twitter.com/mygooloo

Media Contact: contactus@gooloobox.com

Photo - http://photos.prnewswire.com/prnh/20150708/233803

SOURCE  GOOLOO

Photo:http://photos.prnewswire.com/prnh/20150708/233803
http://photoarchive.ap.org/
GOOLOO

CONTACT: +86-0755-8282-8144

Web Site: https://twitter.com/mygooloo

NTT Resonant's Cloud-based Testing Service Remote TestKit Adds Rapid Tester for Basic Test Automation

-New Way to Test Apps in the IoT Age-

-Test your app or website automatically on more than 300+ different devices-

TOKYO, July 9, 2015 /PRNewswire/ -- NTT Resonant Inc. has added a service that can automatically run tests on their collection of more than 300+ smartphone models on Remote TestKit (https://appkitbox.com/en/testkit), their cloud-based testing service. This update also includes a completely renewed web browser interface.

(Photo: http://prw.kyodonews.jp/opn/release/201507091818/ )

1. Background

In this age of the Internet of Things (IoT), IT systems are becoming the backbone of our society and the quality of smartphone apps has become more important than ever. However, new phone models come out every season, and the associated costs to maintain this diversity of devices becomes higher every year. Still pre-launch testing is limited to few devices that developers could have their own. In average, those are only tens or even single digits of devices. Moreover, developers spend the most of time and make efforts on customer support and patching bug. To release these testing matters, Remote TestKit offers more than 300 different smartphone models, and saves your time from repeating similar testing processes on many devices by providing simple and easy automated testing function. With this, you can simply set once then execute basic tests on 300 devices, hands free, find bug before your users do.

(Reference) Android Access Rates
About 2,000 different kinds of devices accessed goo's homepage (*1) over a month, showing the enormous diversity in devices that are in use.

    Access Rates for the Most Popular Android
     Devices (May 2015)

    Number of Devices        Percent of Total

    Top 10 devices                             30%

    Top 100 devices                            65%

    Top 300 devices                            90%

    Top 1,000 devices                          95%

    Top 2,000 devices                         100%
10 devices accounted for about 30% of all devices that accessed the site, and looking at the top 100 devices gives you about 65% of the whole picture. These figures imply that in order to ensure that all users would be able to use your site without issues, the site would need to be tested on hundreds of devices.

2. Outline of Rapid Tester

A. Three New Services

Rapid Tester consists of the following three services:

i. Test Storage Service
A private test storage that you can register the app you want to test, or to create web URL lists and keep them for next testing. Also, all of test results will be saved, providing downloads. You can use this test  storage for both automated tests and manual tests with the registered app.

ii. Rapid test for Apps/Web - Selected devices
Smartphones you often test on can be added as a group. You can run a single test case on multiple devices at the same time. We also have a number of arranged groups based on manufacturer, operating system, or even popular testing devices among many users to make your testing go more smoothly.

iii. Rapid Test for Apps/Web - New Devices
When a new device model or a device with new OS version is added, Remote TestKit will automatically test on your pre-registered Apps and URL list over on the new device and make a report. Tests are always carried out automatically whenever a new device is added to our cloud, so you don't need to worry about keeping a track on new additions of device all the time.

B. Details about Rapid Tester

i. Android App Testing
The following basic actions will be tested automatically and the screenshots will be taken as results.
Step 1: Application Install and launch (0, 5, 10, 15, and 20 seconds after)
Step 2: Moving to and returning from the background
Step 3: Rotating the screen and rotating back

ii. Web browser Testing
Access multiple URL in the web browser and take screenshots.

C. Function Coverage According to Pricing Plans

i. Flat Plan
A plan to have a full set of the service as much as you want at flat rate monthly.

ii. Ticket Plan
A plan to charge for certain length of time each month. Pay as you use.
- Monthly 10, 50, & 100
Applicable to use Test Storage & Rapid test for Apps/Web - Selected devices
- Monthly 3
Please note that Monthly 3 is not applicable to using new functions.
We hope you consider upgrade this to Monthly 10 or above.

3. Special Offer for using new functions

All current subscribers for Monthly 10, 50, or 100 Plan on July 9 and new subscribers for the above plan by July 31 will receive a free Flat 1 Plan (valued at $550), which you can use until the end of July. We hope you take try and experience the full range of service with Flat Plan that are not covered with the Ticket (Monthly) Plans.

Exclusive Features of Flat Plan:
- Use any device as much as you want
- Rapid Test for Apps/Web - New Devices
- Simultaneous automated testing on multiple devices with Selenium
- Return devices without having to wait for the 30-minute minimum

For more details about this promotion, please visit the following page:
https://appkitbox.com/en/testkit/campaign201507

4. Redesigned User Interface
Remote TestKit can be used with a web browser (Web version), or dedicated client software (Client app version), or Thrift API. This time, we have completely redesigned the web version's interface, in order to provide better user experience.

New Features:
- More intuitive user interface
- Devices can now be sorted by categories, like manufacturer and OS version
- Swap easily between test devices that are in use
- Seamless integration with Rapid Tester

About Remote TestKit

Remote TestKit is a service that allows developers to test smartphone apps and mobile websites on the cloud. Users can remotely test on more than 300 different models, without purchasing the devices themselves. The service also includes a number of useful features - including automated tests, which allow a series of test cases to be run automatically - to make app testing easier on the developer's side.

Features:

- Over 300 different models available for remote use, including Android phones, iPhones, and tablets
- Automated testing can run test cases on multiple devices simultaneously
- Smooth video playback with low input delay

Official site: https://appkitbox.com/en/testkit/

*1 About "goo"
The portal site providing services that support customers' activitieslaunched in 1997, the NTT Group's goo Internet portal site was Japan's first full-fledged Japanese language crawler type full-text search engine.

The names of the companies, services, and products mentioned in this press release are the trademarks of their respective companies.

SOURCE  NTT Resonant Inc.

NTT Resonant Inc.

CONTACT: Contact (media): Yuko Tateishi, Natsumi Takane, NTT Resonant Inc., Tel: +81-3-6703-6250, Email: pr@nttr.co.jp , / Contact (others): Katsunori Hagino, NTT Resonant Inc., Tel: +81-3-6703-6006, E-mail: developers-pr@nttr.co.jp

New at RS Components, High-Quality Ratchet Wrenches Built for Fast Work in Tight Spaces

GearWrench 120XP range features ultra-efficient 3-degree swing arc

BEIJING, July 9, 2015 /PRNewswire/ -- RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is now stocking the latest GearWrench(®) 120XP ratcheting socket wrenches and spanners, which feature a precise 3-degree swing arc and long reach with a compact head design to help engineers work quickly and efficiently even in inaccessible areas.

http://photos.prnasia.com/prnvar/20150615/8521503946

http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

This innovative new range by Apex Tool Group comes from the same brand portfolio as Allen, the enduring industry reference for hex keys. The tools are designed with high-quality materials and finishes to provide a lifetime's service.

The socket wrenches offer a choice of 1/4-, 3/8- or 1/2-inch square drive, with long handles giving lengths of 5.11 inch, 8.38 inch and 11.02 inch respectively for enhanced reach. They also feature a low-profile teardrop-shaped head with 6-position adjustable angle, which enhances usability in tight spaces such as inside enclosures or behind panels. The wrenches are available individually, or as a 3-wrench set, or in multi-piece socket sets containing a selection of SAE and metric size sockets.

The 120XP line also includes several ranges of combination spanners, including solid steel spanners in sizes from 6mm to 19mm, and flex head spanners with a choice of open non-ratcheting end or 0-degree offset box-type non-ratcheting end in sizes from 8mm to 19mm. All feature the GearWrench XL beam, which is extra long and wide to allow enhanced force distribution and optimum reach. The spanners can be bought individually or as multi-piece sets in metric or SAE sizes.

Ratchet gimbals with 1/4- and 3/8-inch square drive are also available, which fit conveniently in the palm of the hand to allow quick and easy tightening. Rotation on two planes allows use at various angles, and the units feature an easily accessible forward/reverse lever and 72-tooth ratchet giving a 5-degree swing arc.

About RS Components

RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the global distributor for engineers. With operations in 32 countries, we offer more than 500,000 products through the internet, catalogues and at trade counters to over one million customers, shipping around 44,000 parcels a day. Our products, sourced from 2,500 leading suppliers, include electronic components, electrical, automation and control, and test and measurement equipment, and engineering tools and consumables.

Electrocomponents is listed on the London Stock Exchange and in the last financial year ended 31 March 2015 had revenues of GBP1.27bn.

For more information, please visit the website at http://china.rs-online.com.

RS Components
Tan Soo Chun
Public Relations Manager - Asia Pacific
Email: soochun.tan@rs-components.com
Telephone: +65-6430-3324

Edelman Public Relations (Singapore)
Yvette Yeo
Manager
Email: yvette.yeo@edelman.com
Telephone: +65-6347-2355

Further information is available via these links:

@RSElectronics; @alliedelec; @designsparkRS

RS Components on Linkedin
http://www.linkedin.com/company/rs-components

RS Components on Weibo
http://e.weibo.com/u/3206377000?type=0

Relevant Links:

Electrocomponents plc
http://www.electrocomponents.com

RS Components
http://www.rs-online.com/

DesignSpark
http://www.designspark.com

Photo - http://photos.prnasia.com/prnh/20150615/8521503946
Logo - http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

SOURCE  RS Components Singapore

RS Components Singapore

Web Site: http://china.rs-online.com/

New at RS Components, High-Quality Ratchet Wrenches Built for Fast Work in Tight Spaces

GearWrench 120XP range features ultra-efficient 3-degree swing arc

HONG KONG, July 9, 2015 /PRNewswire/ -- RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is now stocking the latest GearWrench(®) 120XP ratcheting socket wrenches and spanners, which feature a precise 3-degree swing arc and long reach with a compact head design to help engineers work quickly and efficiently even in inaccessible areas.

http://photos.prnasia.com/prnvar/20150615/8521503946

http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

This innovative new range by Apex Tool Group comes from the same brand portfolio as Allen, the enduring industry reference for hex keys. The tools are designed with high-quality materials and finishes to provide a lifetime's service.

The socket wrenches offer a choice of 1/4-, 3/8- or 1/2-inch square drive, with long handles giving lengths of 5.11 inch, 8.38 inch and 11.02 inch respectively for enhanced reach. They also feature a low-profile teardrop-shaped head with 6-position adjustable angle, which enhances usability in tight spaces such as inside enclosures or behind panels. The wrenches are available individually, or as a 3-wrench set, or in multi-piece socket sets containing a selection of SAE and metric size sockets.

The 120XP line also includes several ranges of combination spanners, including solid steel spanners in sizes from 6mm to 19mm, and flex head spanners with a choice of open non-ratcheting end or 0-degree offset box-type non-ratcheting end in sizes from 8mm to 19mm. All feature the GearWrench XL beam, which is extra long and wide to allow enhanced force distribution and optimum reach. The spanners can be bought individually or as multi-piece sets in metric or SAE sizes.

Ratchet gimbals with 1/4- and 3/8-inch square drive are also available, which fit conveniently in the palm of the hand to allow quick and easy tightening. Rotation on two planes allows use at various angles, and the units feature an easily accessible forward/reverse lever and 72-tooth ratchet giving a 5-degree swing arc.

About RS Components

RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the global distributor for engineers. With operations in 32 countries, we offer more than 500,000 products through the internet, catalogues and at trade counters to over one million customers, shipping around 44,000 parcels a day. Our products, sourced from 2,500 leading suppliers, include electronic components, electrical, automation and control, and test and measurement equipment, and engineering tools and consumables.

Electrocomponents is listed on the London Stock Exchange and in the last financial year ended 31 March 2015 had revenues of GBP1.27bn.

For more information, please visit the website at http://www.rs-online.com.

RS Components
Tan Soo Chun
Public Relations Manager - Asia Pacific
Email: soochun.tan@rs-components.com
Telephone: +65-6430-3324

Edelman Public Relations (Singapore)
Yvette Yeo
Manager
Email: yvette.yeo@edelman.com
Telephone: +65-6347-2355

Further information is available via these links:

@RSElectronics; @alliedelec; @designsparkRS

RS Components on Linkedin
http://www.linkedin.com/company/rs-components

RS Components on Weibo
http://e.weibo.com/u/3206377000?type=0

Relevant Links:

Electrocomponents plc
http://www.electrocomponents.com

RS Components
http://www.rs-online.com/

DesignSpark
http://www.designspark.com

Photo - http://photos.prnasia.com/prnh/20150615/8521503946
Logo - http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

SOURCE  RS Components Singapore

RS Components Singapore

Web Site: http://hken.rs-online.com/

New at RS Components, High-Quality Ratchet Wrenches Built for Fast Work in Tight Spaces

GearWrench 120XP range features ultra-efficient 3-degree swing arc

SYDNEY, July 9, 2015 /PRNewswire/ -- RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is now stocking the latest GearWrench(®) 120XP ratcheting socket wrenches and spanners, which feature a precise 3-degree swing arc and long reach with a compact head design to help engineers work quickly and efficiently even in inaccessible areas.

http://photos.prnasia.com/prnvar/20150615/8521503946

http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

This innovative new range by Apex Tool Group comes from the same brand portfolio as Allen, the enduring industry reference for hex keys. The tools are designed with high-quality materials and finishes to provide a lifetime's service.

The socket wrenches offer a choice of 1/4-, 3/8- or 1/2-inch square drive, with long handles giving lengths of 5.11 inch, 8.38 inch and 11.02 inch respectively for enhanced reach. They also feature a low-profile teardrop-shaped head with 6-position adjustable angle, which enhances usability in tight spaces such as inside enclosures or behind panels. The wrenches are available individually, or as a 3-wrench set, or in multi-piece socket sets containing a selection of SAE and metric size sockets.

The 120XP line also includes several ranges of combination spanners, including solid steel spanners in sizes from 6mm to 19mm, and flex head spanners with a choice of open non-ratcheting end or 0-degree offset box-type non-ratcheting end in sizes from 8mm to 19mm. All feature the GearWrench XL beam, which is extra long and wide to allow enhanced force distribution and optimum reach. The spanners can be bought individually or as multi-piece sets in metric or SAE sizes.

Ratchet gimbals with 1/4- and 3/8-inch square drive are also available, which fit conveniently in the palm of the hand to allow quick and easy tightening. Rotation on two planes allows use at various angles, and the units feature an easily accessible forward/reverse lever and 72-tooth ratchet giving a 5-degree swing arc.

About RS Components

RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the global distributor for engineers. With operations in 32 countries, we offer more than 500,000 products through the internet, catalogues and at trade counters to over one million customers, shipping around 44,000 parcels a day. Our products, sourced from 2,500 leading suppliers, include electronic components, electrical, automation and control, and test and measurement equipment, and engineering tools and consumables.

Electrocomponents is listed on the London Stock Exchange and in the last financial year ended 31 March 2015 had revenues of GBP1.27bn.

For more information, please visit the website at http://www.rs-online.com.

RS Components
Tan Soo Chun
Public Relations Manager - Asia Pacific
Email: soochun.tan@rs-components.com
Telephone: +65-6430-3324

Edelman Public Relations (Singapore)
Yvette Yeo
Manager
Email: yvette.yeo@edelman.com
Telephone: +65-6347-2355

Further information is available via these links:

@RSElectronics; @alliedelec; @designsparkRS

RS Components on Linkedin
http://www.linkedin.com/company/rs-components

RS Components on Weibo
http://e.weibo.com/u/3206377000?type=0

Relevant Links:

Electrocomponents plc
http://www.electrocomponents.com

RS Components
http://www.rs-online.com/

DesignSpark
http://www.designspark.com

Photo - http://photos.prnasia.com/prnh/20150615/8521503946
Logo - http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

SOURCE  RS Components Singapore

RS Components Singapore

Web Site: http://au.rs-online.com/

New at RS Components, High-Quality Ratchet Wrenches Built for Fast Work in Tight Spaces

GearWrench 120XP range features ultra-efficient 3-degree swing arc

MANILA, Philippines, July 9, 2015 /PRNewswire/ -- RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is now stocking the latest GearWrench(®) 120XP ratcheting socket wrenches and spanners, which feature a precise 3-degree swing arc and long reach with a compact head design to help engineers work quickly and efficiently even in inaccessible areas.

http://photos.prnasia.com/prnvar/20150615/8521503946

http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

This innovative new range by Apex Tool Group comes from the same brand portfolio as Allen, the enduring industry reference for hex keys. The tools are designed with high-quality materials and finishes to provide a lifetime's service.

The socket wrenches offer a choice of 1/4-, 3/8- or 1/2-inch square drive, with long handles giving lengths of 5.11 inch, 8.38 inch and 11.02 inch respectively for enhanced reach. They also feature a low-profile teardrop-shaped head with 6-position adjustable angle, which enhances usability in tight spaces such as inside enclosures or behind panels. The wrenches are available individually, or as a 3-wrench set, or in multi-piece socket sets containing a selection of SAE and metric size sockets.

The 120XP line also includes several ranges of combination spanners, including solid steel spanners in sizes from 6mm to 19mm, and flex head spanners with a choice of open non-ratcheting end or 0-degree offset box-type non-ratcheting end in sizes from 8mm to 19mm. All feature the GearWrench XL beam, which is extra long and wide to allow enhanced force distribution and optimum reach. The spanners can be bought individually or as multi-piece sets in metric or SAE sizes.

Ratchet gimbals with 1/4- and 3/8-inch square drive are also available, which fit conveniently in the palm of the hand to allow quick and easy tightening. Rotation on two planes allows use at various angles, and the units feature an easily accessible forward/reverse lever and 72-tooth ratchet giving a 5-degree swing arc.

About RS Components

RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the global distributor for engineers. With operations in 32 countries, we offer more than 500,000 products through the internet, catalogues and at trade counters to over one million customers, shipping around 44,000 parcels a day. Our products, sourced from 2,500 leading suppliers, include electronic components, electrical, automation and control, and test and measurement equipment, and engineering tools and consumables.

Electrocomponents is listed on the London Stock Exchange and in the last financial year ended 31 March 2015 had revenues of GBP1.27bn.

For more information, please visit the website at http://www.rs-online.com.

RS Components
Tan Soo Chun
Public Relations Manager - Asia Pacific
Email: soochun.tan@rs-components.com
Telephone: +65-6430-3324

Edelman Public Relations (Singapore)
Yvette Yeo
Manager
Email: yvette.yeo@edelman.com
Telephone: +65-6347-2355

Further information is available via these links:

@RSElectronics; @alliedelec; @designsparkRS

RS Components on Linkedin
http://www.linkedin.com/company/rs-components

RS Components on Weibo
http://e.weibo.com/u/3206377000?type=0

Relevant Links:

Electrocomponents plc
http://www.electrocomponents.com

RS Components
http://www.rs-online.com/

DesignSpark
http://www.designspark.com

Photo - http://photos.prnasia.com/prnh/20150615/8521503946
Logo - http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

SOURCE  RS Components Singapore

RS Components Singapore

Web Site: http://ph.rs-online.com/

New at RS Components, High-Quality Ratchet Wrenches Built for Fast Work in Tight Spaces

GearWrench 120XP range features ultra-efficient 3-degree swing arc

KUALA LUMPUR, Malaysia, July 9, 2015 /PRNewswire/ -- RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is now stocking the latest GearWrench(®) 120XP ratcheting socket wrenches and spanners, which feature a precise 3-degree swing arc and long reach with a compact head design to help engineers work quickly and efficiently even in inaccessible areas.

http://photos.prnasia.com/prnvar/20150615/8521503946

http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

This innovative new range by Apex Tool Group comes from the same brand portfolio as Allen, the enduring industry reference for hex keys. The tools are designed with high-quality materials and finishes to provide a lifetime's service.

The socket wrenches offer a choice of 1/4-, 3/8- or 1/2-inch square drive, with long handles giving lengths of 5.11 inch, 8.38 inch and 11.02 inch respectively for enhanced reach. They also feature a low-profile teardrop-shaped head with 6-position adjustable angle, which enhances usability in tight spaces such as inside enclosures or behind panels. The wrenches are available individually, or as a 3-wrench set, or in multi-piece socket sets containing a selection of SAE and metric size sockets.

The 120XP line also includes several ranges of combination spanners, including solid steel spanners in sizes from 6mm to 19mm, and flex head spanners with a choice of open non-ratcheting end or 0-degree offset box-type non-ratcheting end in sizes from 8mm to 19mm. All feature the GearWrench XL beam, which is extra long and wide to allow enhanced force distribution and optimum reach. The spanners can be bought individually or as multi-piece sets in metric or SAE sizes.

Ratchet gimbals with 1/4- and 3/8-inch square drive are also available, which fit conveniently in the palm of the hand to allow quick and easy tightening. Rotation on two planes allows use at various angles, and the units feature an easily accessible forward/reverse lever and 72-tooth ratchet giving a 5-degree swing arc.

About RS Components

RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the global distributor for engineers. With operations in 32 countries, we offer more than 500,000 products through the internet, catalogues and at trade counters to over one million customers, shipping around 44,000 parcels a day. Our products, sourced from 2,500 leading suppliers, include electronic components, electrical, automation and control, and test and measurement equipment, and engineering tools and consumables.

Electrocomponents is listed on the London Stock Exchange and in the last financial year ended 31 March 2015 had revenues of GBP1.27bn.

For more information, please visit the website at http://www.rs-online.com.

RS Components
Tan Soo Chun
Public Relations Manager - Asia Pacific
Email: soochun.tan@rs-components.com
Telephone: +65-6430-3324

Edelman Public Relations (Singapore)
Yvette Yeo
Manager
Email: yvette.yeo@edelman.com
Telephone: +65-6347-2355

Further information is available via these links:

@RSElectronics; @alliedelec; @designsparkRS

RS Components on Linkedin
http://www.linkedin.com/company/rs-components

RS Components on Weibo
http://e.weibo.com/u/3206377000?type=0

Relevant Links:

Electrocomponents plc
http://www.electrocomponents.com

RS Components
http://www.rs-online.com/

DesignSpark
http://www.designspark.com

Photo - http://photos.prnasia.com/prnh/20150615/8521503946
Logo - http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

SOURCE  RS Components Singapore

RS Components Singapore

Web Site: http://my.rs-online.com/

New at RS Components, High-Quality Ratchet Wrenches Built for Fast Work in Tight Spaces

GearWrench 120XP range features ultra-efficient 3-degree swing arc

TAIPEI, July 9, 2015 /PRNewswire/ -- RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is now stocking the latest GearWrench(®) 120XP ratcheting socket wrenches and spanners, which feature a precise 3-degree swing arc and long reach with a compact head design to help engineers work quickly and efficiently even in inaccessible areas.

http://photos.prnasia.com/prnvar/20150615/8521503946

http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

This innovative new range by Apex Tool Group comes from the same brand portfolio as Allen, the enduring industry reference for hex keys. The tools are designed with high-quality materials and finishes to provide a lifetime's service.

The socket wrenches offer a choice of 1/4-, 3/8- or 1/2-inch square drive, with long handles giving lengths of 5.11 inch, 8.38 inch and 11.02 inch respectively for enhanced reach. They also feature a low-profile teardrop-shaped head with 6-position adjustable angle, which enhances usability in tight spaces such as inside enclosures or behind panels. The wrenches are available individually, or as a 3-wrench set, or in multi-piece socket sets containing a selection of SAE and metric size sockets.

The 120XP line also includes several ranges of combination spanners, including solid steel spanners in sizes from 6mm to 19mm, and flex head spanners with a choice of open non-ratcheting end or 0-degree offset box-type non-ratcheting end in sizes from 8mm to 19mm. All feature the GearWrench XL beam, which is extra long and wide to allow enhanced force distribution and optimum reach. The spanners can be bought individually or as multi-piece sets in metric or SAE sizes.

Ratchet gimbals with 1/4- and 3/8-inch square drive are also available, which fit conveniently in the palm of the hand to allow quick and easy tightening. Rotation on two planes allows use at various angles, and the units feature an easily accessible forward/reverse lever and 72-tooth ratchet giving a 5-degree swing arc.

About RS Components

RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the global distributor for engineers. With operations in 32 countries, we offer more than 500,000 products through the internet, catalogues and at trade counters to over one million customers, shipping around 44,000 parcels a day. Our products, sourced from 2,500 leading suppliers, include electronic components, electrical, automation and control, and test and measurement equipment, and engineering tools and consumables.

Electrocomponents is listed on the London Stock Exchange and in the last financial year ended 31 March 2015 had revenues of GBP1.27bn.

For more information, please visit the website at http://www.rs-online.com.

RS Components
Tan Soo Chun
Public Relations Manager - Asia Pacific
Email: soochun.tan@rs-components.com
Telephone: +65-6430-3324

Edelman Public Relations (Singapore)
Yvette Yeo
Manager
Email: yvette.yeo@edelman.com
Telephone: +65-6347-2355

Further information is available via these links:

@RSElectronics; @alliedelec; @designsparkRS

RS Components on Linkedin
http://www.linkedin.com/company/rs-components

RS Components on Weibo
http://e.weibo.com/u/3206377000?type=0

Relevant Links:

Electrocomponents plc
http://www.electrocomponents.com

RS Components
http://www.rs-online.com/

DesignSpark
http://www.designspark.com

Photo - http://photos.prnasia.com/prnh/20150615/8521503946
Logo - http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

SOURCE  RS Components Singapore

RS Components Singapore

Web Site: http://twen.rs-online.com/

New at RS Components, High-Quality Ratchet Wrenches Built for Fast Work in Tight Spaces

GearWrench 120XP range features ultra-efficient 3-degree swing arc

SINGAPORE, July 9, 2015 /PRNewswire/ -- RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is now stocking the latest GearWrench(®) 120XP ratcheting socket wrenches and spanners, which feature a precise 3-degree swing arc and long reach with a compact head design to help engineers work quickly and efficiently even in inaccessible areas.

http://photos.prnasia.com/prnvar/20150615/8521503946

http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

This innovative new range by Apex Tool Group comes from the same brand portfolio as Allen, the enduring industry reference for hex keys. The tools are designed with high-quality materials and finishes to provide a lifetime's service.

The socket wrenches offer a choice of 1/4-, 3/8- or 1/2-inch square drive, with long handles giving lengths of 5.11 inch, 8.38 inch and 11.02 inch respectively for enhanced reach. They also feature a low-profile teardrop-shaped head with 6-position adjustable angle, which enhances usability in tight spaces such as inside enclosures or behind panels. The wrenches are available individually, or as a 3-wrench set, or in multi-piece socket sets containing a selection of SAE and metric size sockets.

The 120XP line also includes several ranges of combination spanners, including solid steel spanners in sizes from 6mm to 19mm, and flex head spanners with a choice of open non-ratcheting end or 0-degree offset box-type non-ratcheting end in sizes from 8mm to 19mm. All feature the GearWrench XL beam, which is extra long and wide to allow enhanced force distribution and optimum reach. The spanners can be bought individually or as multi-piece sets in metric or SAE sizes.

Ratchet gimbals with 1/4- and 3/8-inch square drive are also available, which fit conveniently in the palm of the hand to allow quick and easy tightening. Rotation on two planes allows use at various angles, and the units feature an easily accessible forward/reverse lever and 72-tooth ratchet giving a 5-degree swing arc.

About RS Components

RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the global distributor for engineers. With operations in 32 countries, we offer more than 500,000 products through the internet, catalogues and at trade counters to over one million customers, shipping around 44,000 parcels a day. Our products, sourced from 2,500 leading suppliers, include electronic components, electrical, automation and control, and test and measurement equipment, and engineering tools and consumables.

Electrocomponents is listed on the London Stock Exchange and in the last financial year ended 31 March 2015 had revenues of GBP1.27bn.

For more information, please visit the website at http://www.rs-online.com.

RS Components
Tan Soo Chun
Public Relations Manager - Asia Pacific
Email: soochun.tan@rs-components.com
Telephone: +65-6430-3324

Edelman Public Relations (Singapore)
Yvette Yeo
Manager
Email: yvette.yeo@edelman.com
Telephone: +65-6347-2355

Further information is available via these links:

@RSElectronics; @alliedelec; @designsparkRS

RS Components on Linkedin
http://www.linkedin.com/company/rs-components

RS Components on Weibo
http://e.weibo.com/u/3206377000?type=0

Relevant Links:

Electrocomponents plc
http://www.electrocomponents.com

RS Components
http://www.rs-online.com/

DesignSpark
http://www.designspark.com

Photo - http://photos.prnasia.com/prnh/20150615/8521503946
Logo - http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

SOURCE  RS Components Singapore

RS Components Singapore

Web Site: http://sg.rs-online.com/

New at RS Components, High-Quality Ratchet Wrenches Built for Fast Work in Tight Spaces

GearWrench 120XP range features ultra-efficient 3-degree swing arc

WELLINGTON, New Zealand, July 9, 2015 /PRNewswire/ -- RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is now stocking the latest GearWrench(®) 120XP ratcheting socket wrenches and spanners, which feature a precise 3-degree swing arc and long reach with a compact head design to help engineers work quickly and efficiently even in inaccessible areas.

http://photos.prnasia.com/prnvar/20150615/8521503946

http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

This innovative new range by Apex Tool Group comes from the same brand portfolio as Allen, the enduring industry reference for hex keys. The tools are designed with high-quality materials and finishes to provide a lifetime's service.

The socket wrenches offer a choice of 1/4-, 3/8- or 1/2-inch square drive, with long handles giving lengths of 5.11 inch, 8.38 inch and 11.02 inch respectively for enhanced reach. They also feature a low-profile teardrop-shaped head with 6-position adjustable angle, which enhances usability in tight spaces such as inside enclosures or behind panels. The wrenches are available individually, or as a 3-wrench set, or in multi-piece socket sets containing a selection of SAE and metric size sockets.

The 120XP line also includes several ranges of combination spanners, including solid steel spanners in sizes from 6mm to 19mm, and flex head spanners with a choice of open non-ratcheting end or 0-degree offset box-type non-ratcheting end in sizes from 8mm to 19mm. All feature the GearWrench XL beam, which is extra long and wide to allow enhanced force distribution and optimum reach. The spanners can be bought individually or as multi-piece sets in metric or SAE sizes.

Ratchet gimbals with 1/4- and 3/8-inch square drive are also available, which fit conveniently in the palm of the hand to allow quick and easy tightening. Rotation on two planes allows use at various angles, and the units feature an easily accessible forward/reverse lever and 72-tooth ratchet giving a 5-degree swing arc.

About RS Components

RS Components and Allied Electronics are the trading brands of Electrocomponents plc, the global distributor for engineers. With operations in 32 countries, we offer more than 500,000 products through the internet, catalogues and at trade counters to over one million customers, shipping around 44,000 parcels a day. Our products, sourced from 2,500 leading suppliers, include electronic components, electrical, automation and control, and test and measurement equipment, and engineering tools and consumables.

Electrocomponents is listed on the London Stock Exchange and in the last financial year ended 31 March 2015 had revenues of GBP1.27bn.

For more information, please visit the website at http://www.rs-online.com.

RS Components
Tan Soo Chun
Public Relations Manager - Asia Pacific
Email: soochun.tan@rs-components.com
Telephone: +65-6430-3324

Edelman Public Relations (Singapore)
Yvette Yeo
Manager
Email: yvette.yeo@edelman.com
Telephone: +65-6347-2355

Further information is available via these links:

@RSElectronics; @alliedelec; @designsparkRS

RS Components on Linkedin
http://www.linkedin.com/company/rs-components

RS Components on Weibo
http://e.weibo.com/u/3206377000?type=0

Relevant Links:

Electrocomponents plc
http://www.electrocomponents.com

RS Components
http://www.rs-online.com/

DesignSpark
http://www.designspark.com

Photo - http://photos.prnasia.com/prnh/20150615/8521503946
Logo - http://www.prnasia.com/sa/2011/05/04/20110504368830.jpg

SOURCE  RS Components Singapore

RS Components Singapore

Web Site: http://nz.rs-online.com/

AMEC Ships Advanced Etch Tool for 3D V-NAND Flash Processing to Leading South Korean Manufacturer of Memory Devices

Customer will use Primo SSC AD-RIE(TM) system in leading-edge pilot production line

SAN FRANCISCO and SHANGHAI, July 8, 2015 /PRNewswire/ -- Advanced Micro-Fabrication Equipment Inc. (AMEC) today announced that a Primo SSC AD-RIE(TM) (single-station chamber) system was recently shipped to a leading manufacturer of memory ICs in South Korea. This is AMEC's most advanced dielectric Etcher. It was designed to process critical Etch applications at nodes as low as 1xnm. The customer is already using the SSC AD-RIE system in high-volume production to process critical Etch applications at the 16nm node. The new tool will be installed in their pilot production line for 3D V-NAND flash devices.

The rapid migration to mobile electronics, and the growing richness of applications like data streaming and social media, is raising new performance imperatives for memory capacity and speed. The escalating demands are fast outstripping the capabilities of current-generation 2D NAND processing. 3D V-NAND represents the next process frontier, and AMEC's customer is a leader in the transition. The technology addresses problems like data corruption and photolithography patterning limitations that make it difficult to move 2D NAND manufacturing to the next design node. 3D V-NAND benefits include greater capacity, higher speed, increased power efficiency, improved reliability, and lower production costs.

"Recognizing that 3D V-NAND flash was the future of memory processing, we dedicated considerable R&D resources and worked closely with this customer to develop the essential Etch technology for this high-end manufacturing process," said KI Yoon, VP and GM for AMEC's Key Memory & Logic Group. "Winning a place on this leading manufacturer's 3D V-NAND pilot production line is a tribute to our joint effort. Furthermore, in this highly competitive space with just a few tier-one Etch suppliers, we believe that the quality of our process and our fast response to tough technical challenges helped us secure the order. We're pleased and proud to enable the process for this valued customer."

The Primo SSC AD-RIE tool was designed to provide a high-flow and low-pressure process regime with high ion energies for high aspect ratio contact applications. It's the newest-generation tool in AMEC's Primo dielectric Etch family. Like all AMEC tools, it was built to deliver advanced technology capabilities with ultra-high productivity and low cost-of-ownership advantages.

AMEC executives will be present at SEMICON West in San Francisco next week, July 14-16. The annual conference and tradeshow is the premier gathering for those involved in the global semiconductor equipment industry. 

For more information about the SSC AD-RIE system or other AMEC tools, please visit http://www.amec-inc.com.

About Advanced Micro-Fabrication Equipment Inc. (AMEC)

AMEC is China's leading provider of advanced process technology to global semiconductor manufacturers and others in adjacent energy-related sectors. The company is an entrenched supplier of dielectric and TSV Etch tools, helping tier-one customers build devices at process nodes as low as 1xnm. Today, AMEC has positioned more than 400 process units at 33 leading-edge fabs across Asia.  Also, with its MOCVD tool, the company helps solid-state-lighting manufacturers build today's most advanced LED products. To learn more about AMEC, please visit http://www.amec-inc.com.

SOURCE  Advanced Micro-Fabrication Equipment Corp.

Advanced Micro-Fabrication Equipment Corp.

CONTACT: Jane Evans-Ryan, Genuity PR for AMEC, +1-408-489-6391, jane@genuitypr.com

Web Site: http://www.amec-inc.com

Jumptuit: The iOS smart TV Connection

Jumptuit Launches a Native App for iOS That Connects Your iPhone and iPad to Sony, Vizio, Sharp and Philips smart TVs and Any Smart TV With a Google Nexus Player

Create a Fully Integrated Media Experience in Your Digital Home

NEW YORK, July 8, 2015 /PRNewswire/ -- Today Jumptuit adds an all new iOS App to a seamless multi-platform solution that connects smart phones, tablets, PCs, smart TVs and leading cloud services. The all new Jumptuit iOS App is developed in Swift, Apple's innovative programming language.

Consumers want to easily access and view photos and videos from their iPhones and iPads on their smart TVs without the need for AirPlay or other mirroring software. With mirroring solutions, consumers can experience lag times and interruptions when playing media. In addition, turning on mirroring limits the ability of consumers to multi-task on their mobile devices and consumes battery life.

With Jumptuit, your media on your iOS device plays instantly and smoothly through the Jumptuit TV native app. The Jumptuit TV user interface is designed specifically for the smart TV and includes voice search.

Donald Leka, Founder and CEO of Jumptuit, explains that, "The best way to share family photos and videos on your iOS device with friends and family is on the big screen. Jumptuit connects your iOS device directly to your Sony, Vizio, Sharp, Philips and other smart TVs for a seamless media experience."

All you need to do is install the Jumptuit App on your iOS device from the App Store and smart TV from the Google Play Store. If you have Sonos or another wireless sound system connected to your smart TV you have the ultimate home media experience.

Jumptuit TV supports 2015 Sony Vizio, Sharp and Philips models. If you have a smart TV that is an older model or a different make, you can access your iPhone and iPad photos and videos by installing the Jumptuit TV App on a set top box like the Google Nexus player.

Easy Setup

Is it possible to create an easy to use, seamless and elegant multi-platform solution for consumers? The answer is a resounding yes.

    1. Install the iOS Jumptuit App on your iPhone and/or iPad
    2. In the Jumptuit iOS App, sync your photos and videos to the cloud service
       of your choice or to free storage in Jumptuit by selecting your iOS
       device in the connected Source Menu.
    3. Install the Jumptuit TV App on your Sony, Vizio, Philips or Sharp smart
       TV or on the Google Nexus Player.
Voila! Now you can begin enjoying your personal photos and home movies with your family and friends on the big screen!

https://photos.prnewswire.com/prnvar/20150708/233801LOGO

Logo - http://photos.prnewswire.com/prnh/20150708/233801LOGO

SOURCE  Jumptuit

Photo:https://photos.prnewswire.com/prnh/20150708/233801LOGO
http://photoarchive.ap.org/
Jumptuit

CONTACT: Madison Murach, 1-212-843-9268, mmurach@rubenstein.com

Urban Fulfillment Services increases throughput, reduces inefficiencies by adopting Ricoh's InfoPrint 5000

Leading mortgage solutions company leverages Ricoh's inkjet technology to better streamline the printing of millions of documents daily

MALVERN, Pa., July 8, 2015 /PRNewswire/ -- Ricoh Americas Corporation today announced that Urban Fulfillment Services (UFS), a wholly owned subsidiary of Urban Lending Solutions, has upgraded its print operations by adding multiple InfoPrint 5000 continuous feed inkjet systems, helping to increase throughput and efficiency. UFS, the nation's largest minority-owned business outsource services provider to the financial services industry, is now better able to meet customers' and regulators' stringent requirements, and exceed customer expectations by leveraging their partnership with Ricoh.

"We work with our customers and with Ricoh to understand what the requirements are, what the problems are and what the customer has to work with. We then develop systems and procedures leveraging Ricoh technology to provide solutions that best address those requirements," said Steve Wilson, Senior Vice President, Business Development, UFS. "The Ricoh team has become a proven and trusted partner because we can depend on them to provide honest insights into the technology and solutions currently available in the marketplace.  This helps us properly evaluate what can best address our customers' needs."

Established in 2002 as a title and settlement services provider, UFS is now a major business outsource services provider that provides a wide variety of services to its clients, including document fulfillment services. To improve customer service and increase oversight of their print operations, UFS brought the production of documents in house this year, opening a brand new 25,000-square-foot print facility with a capacity of 1.8 million pages per day and 24/7 production capability.

When UFS considered what new equipment to deploy in their new print facility, it knew it needed devices that could leverage high-quality inks to increase color gamut and meet corporate graphic requirements. UFS decision makers realized their customers sought the ability to print on heavier stocks for greater whiteness, brightness and opacity. Additionally, UFS wanted to incorporate Advanced Function Presentation (AFP) architecture in its new shop, leveraging this powerful platform to efficiently handle large file print streams. With those criteria in mind, UFS selected Ricoh and the InfoPrint 5000.

The increased processing power and output quality from Ricoh's InfoPrint 5000 has helped UFS to become a full service document production company. The platform offers UFS scalability, along with the ability to boost the print quality of complex jobs such as statement processing and marketing collateral on demand. The InfoPrint 5000 ink management tools help improve the accuracy of job estimates and monitor ink usage to lower operational costs. Its open print architecture helps ensure interoperability in multi-vendor environments. The InfoPrint 5000 also supports pigment, dye and MICR inks, and a wide range of paper stocks and file formats, along with support for process and spot colors and International Color Consortium (ICC)-based color management profiles.

"Urban Fulfillment Services calls us their partner, not their vendor, and that is exactly what we aim to be with all of our customers. By allowing us to work side-by-side with them, we've been able to learn some of the particular challenges their industry and business faces and align our solutions to address them," said Andre Brazeau, Vice President of Production Print Solutions, Ricoh Americas Corporation. "Having seen many clients opening new print facilities to increase their production capabilities, we knew that the InfoPrint 5000 platform would give UFS the support needed to manage capacity and expand their service offerings, all while keeping overall costs down. We look forward to a long partnership with UFS."

To learn more about UFS' use of the InfoPrint 5000, watch this video.

About Ricoh

Ricoh is a global technology company specializing in office imaging equipment, production print solutions, document management systems and IT services. Headquartered in Tokyo, Ricoh Group operates in about 200 countries and regions. In the financial year ending March 2015, Ricoh Group had worldwide sales of 2,231 billion yen (approx. 18.5 billion USD).

The majority of the company's revenue comes from products, solutions and services that improve the interaction between people and information. Ricoh also produces award-winning digital cameras and specialized industrial products. It is known for the quality of its technology, the exceptional standard of its customer service and sustainability initiatives.

Under its corporate tagline, imagine. change. Ricoh helps companies transform the way they work and harness the collective imagination of their employees.

For further information, please visit  http://www.ricoh.com/about/

© 2015 Ricoh Americas Corporation. All rights reserved. All referenced product names are the trademarks of their respective companies.

Contacts: 
John Greco 
Ricoh Americas Corporation 
(973) 882-2023   
john.greco@ricoh-usa.com

Tracey Sheehy   
Breakaway Communications   
(212) 616-6003   
tsheehy@breakawaycom.com

http://photos.prnewswire.com/prnvar/20140718/128670

Video - http://youtu.be/3GOfGhpuN10

Logo - http://photos.prnewswire.com/prnh/20140718/128670

SOURCE  Ricoh Americas Corporation

Photo:http://photos.prnewswire.com/prnh/20140718/128670
http://photoarchive.ap.org/
Video:http://youtu.be/3GOfGhpuN10
Ricoh Americas Corporation

Trending: Dot, The World's Smallest Bluetooth Headset, Exceeds Crowdfunding Goal in 1 Hour on Kickstarter!

Dot is the world's smallest Bluetooth earbud. In less than one hour, Dot exceeded its crowdfunding goal on Kickstarter and is now trending as one of the most popular campaigns.

NEWPORT BEACH, Calif., July 8, 2015 /PRNewswire/ -- Say goodbye to tangled wires and big, bulky headsets. Dot is the world's smallest Bluetooth earbud (https://www.kickstarter.com/projects/sospeciallabs/dot-worlds-smallest-bluetooth-headset). It's so small it virtually disappears in the ear. Weighting in at only 3.5 grams, and smaller than the size of a quarter, Dot is packed with the latest in wireless and audio technology.

Photo - http://photos.prnewswire.com/prnh/20150707/232985
Photo - http://photos.prnewswire.com/prnh/20150707/232986

From the design and engineering team at So Special Labs, the focus of Dot was in its compact design. By being extremely lightweight and ultra small, users can enjoy crystal clear sound throughout the entire day. Traditional headphone users often complain of fatigue from big, bulky headsets, Dot solves that problem and also comes with different sized silicone earbuds for kids and adults of all ages.

Battery life is impressive with Dot. Included with Dot is a carrying case that doubles as a wireless charger. Just re-insert the earbud into the case for charging on the go. Dot can be fully charged in 30 minutes and the wireless charging case has enough battery life to recharge Dot up to six times.

Dot is simple and intuitive. With a single multi-function button, users can answer phone calls, listen to music and use voice commands. Dot utilizes LED indicator lights for easy pairing and charging functionality - no apps required. Using the latest Bluetooth 4.0 technology, Dot can even wirelessly connect with up to 8 Apple, Android and Windows devices. That means Dot is compatible with the Apple iPhone/iPad, Samsung Galaxy/Note and HTC smartphones.

Dot was artfully designed for all of life's activities, from listening to music and podcasts, to FaceTime and Skype video calling. Dot blends fashion with function. Its minimal design is constructed of lightweight aluminum and durable polycarbonate materials. Dot is available now on Kickstarter - https://www.kickstarter.com/projects/sospeciallabs/dot-worlds-smallest-bluetooth-headset. Early backers save up to $70. Act now, quantities are limited.

About So Special Labs

So Special Labs is the creator of Dot. Based in Southern California, the team specializes in taking innovative ideas and turning them into beautifully designed products.  So Special Labs is a team of entrepreneurs with backgrounds from engineering and design, to crowdfunding and non-profits.

For more information on the Dot created by So Special Labs, please visit the Kickstarter campaign (https://www.kickstarter.com/projects/sospeciallabs/dot-worlds-smallest-bluetooth-headset) and their website (http://sospeciallabs.com).

Media Contact:
Ivan Kan, Co-Founder, So Special Labs
260 Newport Center Drive Irvine, CA 92660
(310) 584 7218
Email

SOURCE  Dot - So Special Labs

Photo:http://photos.prnewswire.com/prnh/20150707/232985
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20150707/232986
http://photoarchive.ap.org/
Dot - So Special Labs

Web Site: http://www.sospeciallabs.com

Solar Paper, Eco-Friendly Power-Supply Device for Smartphones, to Launch on Kickstarter on July 7

SEOUL, South Korea, July 8, 2015 /PRNewswire/ -- #KICKSTARTER -- YOLK has reported that it will showcase Solar Paper, an eco-friendly, ultra-thin solar panel, on Kickstarter on July 7 at 11 a.m. GMT (on the 8th at 2 a.m. KST).

Solar Paper is a product that is designed to accumulate electricity via a solar panel. It then provides it to various devices, including smartphones.

YOLK's super-efficient solar panel production technology is applied to the product. It produces 5W, which is the highest power output when compared to similar products on the market. The product consists of two solar panels, and each panel can produce 2.5W.

Solar Paper's volume is 9cm x 17cm x 1.5cm, and it weighs 60g, which makes it highly portable.

When it is sunny, it can charge an iPhone 6 in about 2.5 hours. When it is cloudy, it takes 3 hours to fully charge the battery. This proves Solar Paper's high performance, as it possesses the same charging speed as regular wall chargers. Also, the magnet inside allows it to be attached to metal surfaces, and it is highly durable with waterproof functions.

Furthermore, it does not need separate cables and extra parts, for it has built-in ports for Android phones and iPhones.

Solar Paper is equipped with the following features:

- Auto reset function: When shadows are cast on the solar panels and disappear, Solar Paper is automatically reset. This is highly convenient because the users do not have to re-plug the device all of the time.

- Built-in magnet: A magnet is attached to each solar panel, and a maximum four panels can be connected (total power output of 10W).

- LCD screen: It displays in real time the amount of power that Solar Paper generates.

Meanwhile, with Solar Paper and Solarade, YOLK will participate in the Outdoor Retail Show, the largest North American outdoor event held Aug. 4 to 8 in Salt Lake City, Utah.

The company has booth No. D126 on the 4th at the Open Air Demo and No. PV3043 from the 5th to 8th at Salt Palace Convention Center.

The company will exhibit at the Tokyo Gift Show from Sept. 2 to 4, and at the IFA (Internationale Funkausstellung) from Sept. 4 to 9.

More specific information and videos can be found on Kickstarter's website.
https://www.kickstarter.com/projects/1398120161/680582898?tokenÈ256f91

Website: http://www.aving.net/

SOURCE  AVING

AVING

CONTACT: Jane Lee, +82-2-856-3276, global@aving.net

Web Site: http://www.aving.net/

Veritas Unveils New Portfolio to Tackle Unchecked Data Growth and Fragmented Storage

New information management and governance solutions designed to help customers harness the power of information across on-premises and cloud platforms

SINGAPORE, July 8, 2015 /PRNewswire/ -- Veritas, Symantec's (Nasdaq: SYMC) information management business, today announced new offerings for rapidly evolving enterprise datacenters, as well as significant upgrades to its core portfolio of backup and information management products.

http://photos.prnasia.com/prnvar/20150408/8521502200

"Data is increasingly viewed as a valued asset, or even a product itself. With it being stored at higher rates than ever, the volume of data is also expected to double every two years," said Chris Lin, Sales Leader of Asia Pacific & Japan Region, Veritas. "To help companies make sense of their tremendous volumes of data, our new offerings will allow our customers to realize information availability while gathering the insight critical to supporting their business goals."

This set of product enhancements and new solutions showcases a fundamentally different approach to delivering data and services across multiple cloud environments. Enhancements to current products enable simpler management in hybrid cloud infrastructures and extended protection for VMware and Microsoft virtual environments. Veritas is also introducing new products that enable businesses to delve deep into their data stores to recognize and prioritize information across their organizations.

Veritas brings together a unique combination of experience in application availability and storage management on premises and in the cloud. Veritas also offers management tools that help companies find the estimated 1.5 percent of truly valuable data in their organization to glean information, regardless of underlying infrastructure models.

"There are several driving forces impacting a company's ability to take advantage of its data today. Businesses and individuals are creating more data than ever -- and IT organizations are struggling to manage the increasing scope and size of their data storage needs," said Laura DuBois, Program Vice President, Storage and GRC Infrastructure, IDC. "Veritas is well positioned to help companies tap into their data to gain more value, as well as ensure the availability and recovery necessary in today's ever-changing business marketplace."

"The planned separation of Veritas from Symantec is an important milestone for the industry. As many IT environments struggle to achieve better data protection, data preservation, high availability and storage management, Veritas's vision of information availability and insights promises a full suite of solutions and services that companies should look to from storage infrastructure to insight. It will be extremely exciting to watch Veritas build on its data protection and data management pedigree with new storage insights and intelligence that align with tomorrow's IT challenges," said Jason Buffington, Sr. Analyst on Data Protection, Enterprise Strategy Group.

Key product updates and new releases include:

Veritas NetBackup(TM) 7.7, the latest iteration of Symantec's industry-leading, enterprise-grade backup solution adds new functionality and increased performance to support the largest, most dynamic enterprise environments. NetBackup 7.7 introduces enhanced datacenter integration for VMware vSphere 6 and Microsoft Hyper-V, as well as support for hybrid-cloud deployments leveraging Amazon Web Services, Google Nearline and many more. Cloud performance has also been improved and is up to thirty times faster than previous versions. A single solution for the entire enterprise, NetBackup 7.7 empowers IT organizations to reduce complexity and outpace relentless datacenter growth. Find more information here: NetBackup 7.7 press release.

Veritas InfoScale(TM) addresses enterprise business continuity needs for complex, multi-tiered applications in physical and virtual environments. InfoScale solutions provide application availability and software-defined storage to meet datacenter challenges such as operational complexity, tool proliferation, unpredictable service levels and lack of agility through a single, web-based management interface. InfoScale is available via a new, streamlined purchasing model. For more information, click here.

Veritas Resiliency Platform offers a unified, global approach for IT service continuity, helping to ensure critical data and applications remain accessible at all times across complex, multi-vendor physical and virtual environments. Available now, the Resiliency Platform helps customers ensure critical business applications consistently meet stringent Service Level Agreements. The solution brings visibility, simplicity and automation to service continuity, restoring predictability across enterprise IT business services. For more information, click here.

Veritas(TM) Data Insight 5.0 will extend unstructured data analytics to support governance across on-premises storage platforms and Box cloud storage. Through enhanced access control tracking and entitlements orchestration, Data Insight will help ensure file share security. By applying a user-centric lens to data forensics, Data Insight offers business users the ability to monitor anomalous user activity and behavior. Coming later this summer, Data Insight version 5.0 will continue to expand the application of data analytics to facilitate retention management, achieve access compliance, and gain a better understanding of how user risk relates to data sensitivity. For more information, click here.

Veritas(TM) Information Map is the first cloud application built on the Information Fabric technology that will enable companies to gain better visibility into their unstructured data. Information Map will easily glean metadata from Veritas NetBackup(TM), store it in the cloud and present this data in a user-friendly, visual navigation tool that helps identify areas of risk, areas of value and areas of waste across a customer's primary content repositories. Coming later this summer, the Information Map will help businesses make decisions that reduce information risk and optimize information storage. For more information, click here.

An operational separation of Veritas and Symantec is currently scheduled for October 2015, with the complete separation on track by January 2016. For more details on each product and solution, please visit: http://veritas.symantec.com/launch.

About Veritas Technologies Corporation

Veritas Technologies Corporation, the information management company that will emerge from the separation from Symantec, will enable organizations to harness the power of their information, with solutions designed to serve the world's largest and most complex heterogeneous environments. The Veritas business works with 86 percent of Fortune 500 companies today, improving data availability and revealing insights to drive competitive advantage. Veritas generated $2.6 billion in revenue for Symantec in fiscal year 2015.

About Symantec

Symantec Corporation (NASDAQ: SYMC) is an information protection expert that helps people, businesses and governments seeking the freedom to unlock the opportunities technology brings -- anytime, anywhere. Founded in April 1982, Symantec, a Fortune 500 company, operating one of the largest global data-intelligence networks, has provided leading security, backup and availability solutions for where vital information is stored, accessed and shared. The company's more than 19,000 employees reside in more than 50 countries. Ninety-nine percent of Fortune 500 companies are Symantec customers. In fiscal 2015, it recorded revenues of $6.5 billion. To learn more go to http://www.symantec.com or connect with Symantec at: http://www.symantec.com/social/

NOTE TO EDITORS: If you would like additional information on Symantec Corporation and its products, please visit the Symantec News Room at http://www.symantec.com/news.

Symantec, the Symantec logo, Checkmark logo, Veritas, NetBackup, and InfoScale are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners.

This press release contains statements regarding our strategic direction, which may be considered forward-looking within the meaning of the U.S. federal securities laws, including; statements with respect to the proposed timing of the separation. These statements are subject to known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to differ materially from results expressed or implied in this press release. Such risk factors include those related to: risks related to the separation of the company into the security business and the information management business, general economic conditions; maintaining customer and partner relationships; the anticipated growth of certain market segments, particularly with regard to security and information management; the competitive environment in the software industry; changes to operating systems and product strategy by vendors of operating systems; the timing and market acceptance of new product releases and upgrades; the successful development of new products, and the degree to which these products and businesses gain market acceptance. Actual results may differ materially from those contained in the forward-looking statements in this press release. We assume no obligation, and do not intend to update these forward-looking statements as a result of future events or developments. Additional information concerning these and other risks factors is contained in the Risk Factors sections of our Form 10-K for the year ended March 28, 2014.

CONTACTS:

Belinda Lim
Symantec Corporation
+65-6413-4306
belinda_lim@symantec.com

Victoria Lim/ Supriya Arya
Text100 Singapore
+65-6603-9000
veritas@text100.com.sg

Logo - http://photos.prnasia.com/prnh/20150408/8521502200

SOURCE  Symantec Corporation

Symantec Corporation

Web Site: http://www.symantec.com

Award-Winning Marketing Agency Create Advertising Group Launches New Virtual Reality Division CreateVR

Inaugural Project Is A VR Experience for Sony Pictures' "Can You Walk The Walk?" to Support Robert Zemeckis' Highly Anticipated Motion Picture "The Walk"

CULVER CITY, Calif., July 7, 2015 /PRNewswire/ -- Create Advertising Group, one of the world's most accomplished and specialized boutique creative services agencies, has launched a new division CreateVR, dedicated to developing branded, state-of-the-art virtual reality experiences, it was announced today by David Stern, Owner and Founder of Create Advertising Group, and Jonathan Gitlin, Partner and President of Television and Gaming for Create.

CreateVR will work with a wide range of entertainment clients as marketers embrace virtual reality to create innovative and organic brand extensions utilizing the next generation in enhanced story-telling technology.

CreateVR unveiled its inaugural project, "Can You Walk The Walk?," an effective tie-in to the upcoming film The Walk, directed by legendary filmmaker Robert Zemeckis, during the Summer of Sony event that was hosted for invited media last month in Cancun, Mexico.  The experience was also presented to those who attended CineEurope late last month in Barcelona.

The immersive virtual experience invites users to simulate Philippe Petit's historic high-wire walk between the towers of the World Trade Center in 1974.  Petit trained for years to make his 'coup' possible; now virtual reality has made such a feat possible for the rest of us. 

"We believe virtual reality has the potential to become the next great marketing frontier," said David Stern, founder of Create Advertising Group. "Our job is to relate a brand to the VR world in an experience that feels organic and true to the source material.  We are creating virtual environments that double as innovative brand extensions. Once consumers have had a VR experience based around a specific project or brand -- they are invested -- they've had a personal experience and their relationship with the material is forever changed. It is as powerful a hook as we have ever seen."

Added Gitlin, "We could not be more challenged or amazed by the vivid and true-to-life worlds that we are able to create or re-create in virtual reality."

Said Jake Black, head of motion graphics and virtual reality for CreateVR and team leader on the "Can You Walk The Walk?" experience, "As virtual reality platforms like Project Morpheus begin to roll out in the coming year or two at a price point attractive to consumers, the applications for this extraordinary new technology, especially among our entertainment, branding and gaming clients, will continue to grow. It was amazing watching press and everyday consumers finally getting a chance to experience 'Can You Walk The Walk?' and we are already talking to clients about our next applications."

To launch the division, CreateVR has turned to a team of highly-skilled technologists, marketers and gaming industry veterans including Black, Tom Ham, and Dan Pfister.

About David Stern

David Stern is the Founder and President of Create Advertising Group located in Culver City, CA and London, UK. Established in January of 2005, Create is a postproduction editorial company specializing in the crafting of cutting edge audio-visual promotional material (trailers, TV, branding campaigns, and now VR experiences) to support the launch of feature films, DVDs, video games and television series.  Stern has grown Create to over 30 Final Cut/Premiere edit bays and a booming Graphics department, as well as a London office opened in 2009.

Current and past projects include Fantastic Four, Get Hard, Avengers Age of Ultron, Netflix, Goosebumps, Hotel Transylvania 2, Minions, The Walk, and The Lego Movie, to name a few.

Stern's entree into the entertainment arena came through Young & Rubicam Advertising, where he served as Vice President, Account Director, for the Los Angeles Entertainment Division; having transferred from Y&R's New York office in account management roles. Later, Stern held the position of Senior Vice President, Producer/Business Development for Intralink Graphic Film Design for ten years.  Intralink produced advertising material to support theatrical projects. Stern has a Masters of Business Administration from Columbia University and a Bachelors of Business from Emory University.

About Jonathan Gitlin

Known for crafting memorable campaigns, Jonathan Gitlin's creative leadership has helped expand Create Advertising's portfolio into television and gaming. For television, Create has produced memorable trailers and spots for some of the most daring and creatively ambitious programs on the air, among them "Sons of Anarchy," "Orange is the New Black," "Fargo," "Manhattan," and "The Americans." In the gaming arena, the company has become equally well known for innovative ads launching mega hits such as "Dark Souls II," "God of War 3," "Twisted Metal," "Just Dance 4," as well as the console debut of PlayStation 4.

Additionally, its branding division has worked closely with market leaders such as Netflix, Machinima, the BBC and Sony PlayStation.

About Jake Black

Jake Black oversees all of the creative aspects for the company's motion graphics and virtual reality projects. Black's in-depth knowledge of motion graphics, gaming, and the latest advances in virtual reality technology have helped Create to organically grow into this new arena.

Black began his career in entertainment at Create Advertising in 2006 as a Production Assistant. He has held numerous positions at Create including Designer, Post Production Supervisor, Associate Creative Director as well as Creative Director. He has been integral to marketing campaigns for franchises and projects including The Amazing Spider-Man, PlayStation 4, "God of War," "Dark Souls 2," "Just Dance," and Alice In Wonderland.

Black was part of the award-winning team at Create Advertising that received Golden Trailer Awards for best motion graphics for the film adaption of "Hitman."   

About Tom Ham

Tom Ham recently joined CreateVR to help expand growth in the gaming and virtual reality-based businesses.

Most recently, Ham was Head of Publisher Relations at Machinima, the leading multi-channel network (MCN) that specializes in gaming related content distributed across several platforms including YouTube, mobile and Xbox.  During his tenure at Machinima, he oversaw games programming for Machinima Realm, Machinima Respawn and the Xbox App Teams. Most recently he was an integral part of the highly successful "Early Access" program where top YouTubers are able to access highly anticipated games prior to their actual launch.

A recognized media pundit well known for his reviews of video games and observations of the industry, Ham began his career as a game reviewer for one of the nation's most esteemed newspapers, The Washington Post. He also reviewed games for CNET's Gamecenter and Ziff-Davis' GameSpot. He has been a regular contributor to USA Today, Newsweek and The New York Daily News. And his opinions and reviews have been featured in The Wall Street Journal, Rolling Stone, Details, Maxim, Playboy, Next Generation, Electronic Gaming Monthly and GamePro.

About Dan Pfister

Dan Pfister, producer of gaming and virtual reality at Create Advertising Group, oversees projects in the gaming and virtual reality departments.  Pfister began his career in advertising at Razorfish, working on digital media strategy for both Apple and Nike.  He made the move from San Francisco to Los Angeles and began at Create Advertising in 2008 as a Production Assistant. He has grown with the company and has helped diversify Create's portfolio of work by pushing new business in gaming, branding and television.

He has been an integral part of the creative team for franchises and brands including PlayStation 4, "Little Big Planet," "Twisted Metal," DTS, PlayStation Vita, "Dark Souls 2," "Just Dance," and "Need For Speed."

Pfister graduated with a Bachelor of Arts Degree from the University of California, Los Angeles.

About Create Advertising's Recent Awards and Honors

This year, Create Advertising was nominated for several Golden Trailer Awards, including Best Drama Trailer for Fury, Best Comedy Trailer for Get Hard, and Best Thriller Trailer for Lucy, among others.

Last year the company received four Key Art Awards including the theatrical trailer for Lucy as well as their television work for "Fargo" and "Orange is the New Black."  In 2013, Create Advertising was honored by the Key Art Awards for their work on "Stoker" and "Orange is the New Black." In 2012, they were nominated for two Video Game Marketing Awards, and several Screen International Marketing/Distribution Awards, including a nomination for U.K. Creative Agency of the Year.  They were also awarded a Golden Trailer Award for Coriolanus. Additional award-winning campaigns include their work on Iron Man 2, Black Swan, Tron, The King's Speech, Up, District 9, This Is It, Casino Royale, and Smokin' Aces among many others.

For more information, please visit createadvertising.com.

CONTACT:
Rachel Falikoff
Elzer & Associates
213-607-3592

Steve Elzer
Elzer & Associates
213-607-3591

SOURCE  Create Advertising Group

Create Advertising Group

Web Site: http://www.createadvertising.com

Domino's® Launches App for Apple Watch

Customers can now track their order each step of the way on Apple Watch

ANN ARBOR, Mich., July 7, 2015 /PRNewswire/ -- Domino's Pizza (NYSE: DPZ), the recognized world leader in pizza delivery and digital ordering technology, is giving customers yet another way to track their order from anywhere, at any time. Domino's is launching its new app for Apple Watch, which includes the fan-favorite Domino's Tracker(®), beginning today.

https://photos.prnewswire.com/prnvar/20150707/232433

Customers can now track their order from the time it is taken, to when it is placed in the oven and ready for carryout or delivery, all from the ease of their Apple Watch. Domino's is one of the first in the U.S. pizza industry to bring this tracking capability to Apple Watch.

"Domino's is always looking for ways to continue leading the e-commerce industry with our customer-focused technology, and our new app for Apple Watch is no exception," said Dennis Maloney, Domino's vice president - chief digital officer. "Partnering with the world's leading technology innovator to give Domino's customers yet another way to track their order is one more way we hope to make customers' experiences even better and more convenient."

From the watch face, Apple Watch users will be able to swipe up to quickly access the Domino's Glance. Glances are shortcuts to the apps users view most frequently. The Domino's Glance will feature a brief status update of a customer's current order.

To download Domino's app, visit the App Store for Apple Watch.

About Domino's Pizza(®)

Founded in 1960, Domino's Pizza is the recognized world leader in pizza delivery and digital ordering technology, with a significant business in carryout pizza. It ranks among the world's top public restaurant brands with a global enterprise of more than 11,700 stores in over 75 international markets. Domino's had global retail sales of over $8.9 billion in 2014, comprised of more than $4.1 billion in the U.S. and nearly $4.8 billion internationally. In the first quarter of 2015, Domino's had global retail sales of over $2.2 billion, comprised of $1.1 billion in the U.S. and $1.1 billion internationally. Its system is comprised of franchise owners who accounted for nearly 97% of Domino's stores as of the first quarter of 2015. Emphasis on technology innovation helped Domino's generate approximately 50% of U.S. sales from digital channels at the end of 2014, and reach an estimated run rate of $4.0 billion annually in global digital sales. Domino's features an ordering app lineup that covers nearly 95% of the U.S. smartphone market and, in June 2014, debuted voice ordering for its iPhone(®) and Android((TM)) apps, a true technology first within traditional and e-commerce retail.

Order - http://www.dominos.com
Mobile - http://mobile.dominos.com
Digital Info - anyware.dominos.com
Company Info - biz.dominos.com
Twitter - http://twitter.com/dominos
Facebook - http://www.facebook.com/dominos
YouTube - http://www.youtube.com/dominos

http://photos.prnewswire.com/prnvar/20120814/DE55948LOGO-b

Photo - http://photos.prnewswire.com/prnh/20150707/232433
Logo - http://photos.prnewswire.com/prnh/20120814/DE55948LOGO-b

SOURCE  Domino's Pizza

Photo:https://photos.prnewswire.com/prnh/20150707/232433
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20120814/DE55948LOGO-b
http://photoarchive.ap.org/
Domino's Pizza

CONTACT: Media Relations Contact: Jenny Fouracre, Domino's, 313-300-6822 (Mobile), jenny.fouracre@dominos.com

Web Site: http://www.dominos.com

Acme Made Launches the Ultra-Thin and Protective Skinny Sleeve for the Minimalist Form Factor of MacBook® 12

Sleeve Provides an Ideal Blend of Stylish Materials and Rugged Protection

PETALUMA, Calif., July 7, 2015 /PRNewswire/ --Acme Made announces the latest addition to its protective solutions for MacBook(®) and iPad(®): the Skinny Sleeve for MacBook 12.

Featuring a featherweight profile with heavy-hitter protection, the Skinny Sleeve for MacBook 12 interior is built with a screen guard that will protect your device from scratches. The exterior is both water and stain resistant thanks to StretchShell((TM)) neoprene bound with stretch-stitch seams.

The thoughtful design encases MacBook 12 with a snug, low profile fit. With no bulky zippers, snaps or buckles, the Skinny Sleeve easily slips into a larger bag, briefcase, backpack or handbag for easy transport and hassle-free travel. A stylish elastic band ensures that MacBook 12 stays securely inside the sleeve.

Skinny Sleeve for MacBook 12 is available in Matte Black and Grey/Poppy Orange. The U.S. MSPR is $39.95. The Skinny Sleeve collection is available at the online Apple® store and acmemade.com.

    --  Ultra-thin design won't add bulk to another bag.
    --  Our unique StretchShell(TM) neoprene is both water and stain resistant.
    --  Zipperless closure won't scratch your MacBook.
    --  Sewn-in reinforcement on both sides for extra protection.
    --  Stylish elastic band keeps the MacBook 12 securely within the sleeve.
About Acme Made
Acme Made designs innovative and protective solutions for the people who carry the tools of today's modern lifestyle. For more information, visit http://acmemade.com

SOURCE  Acme Made

Acme Made

CONTACT: Katrina Neill, kneill@daymen.com

Web Site: http://acmemade.com

ThinkGeek unveils Original Series Star Trek Bluetooth® Communicator at SDCC

Boldly go to booth #3351 to experience the communicator and more

FAIRFAX, Va., July 7, 2015 /PRNewswire/ -- ThinkGeek is once again preparing to unveil its newest products for fans everywhere at this year's San Diego Comic-Con.  The highlight of the show will be The Wand Company announcing and showing off their newly created, officially licensed Original Series Star Trek Bluetooth® Communicator.

http://photos.prnewswire.com/prnvar/20140812/135609

This highly detailed and flawlessly accurate Communicator is an exact replica of one of the show's last remaining hero props.  Structured-light 3D scanning was used to ensure that every curve and line of the original has been perfectly captured.  The device will pair with Bluetooth® enabled mobile phones to answer calls with the flick of the antenna grille and serve as a desktop speaker as well.

Along with the Original Series Star Trek Bluetooth® Communicator, ThinkGeek is also unveiling for the press and public the following other products:

    --  Star-Lord Knapsack
    --  Action Figure Beach Blanket
    --  Knight Rider K.I.T.T Car Charger
    --  Tesla Styled Watch
    --  Black Widow Light-Up T-Shirt
    --  Star Wars R2D2 Bluetooth® Speakerphone
To experience these products first-hang visit ThinkGeek's booth at San Diego Comic-Con, #3351, and if you're unable to make it to this year's SDCC then everything can be viewed at http://www.thinkgeek.com.

About ThinkGeek

ThinkGeek, a wholly owned subsidiary of Geeknet, Inc. (NASDAQ: GKNT), is the premier retailer for the global geek community.  Since 1999, ThinkGeek has been creating a world where everyone can express and celebrate their inner geek, turn there interests into passions, and connect with one another.  We are obsessed with creating and sharing unique and authentic experiences that stimulate our fans' imaginations and fuel their geek core.  We believe there is a geek in everyone and invite you to Join In. Geek Out.  Learn more at ThinkGeek.com

GKNT-G

Logo - http://photos.prnewswire.com/prnh/20140812/135609

SOURCE  Geeknet, Inc.

Photo:http://photos.prnewswire.com/prnh/20140812/135609
http://photoarchive.ap.org/
Geeknet, Inc.

CONTACT: Steve Zimmermann, Head of PR, ThinkGeek, steve@thinkgeek.com; Jessica Darrican, The Max Borges Agency, Jessica@maxborgesagency.com

Web Site: http://www.thinkgeek.com

Huawei Strengthens Retail Presence in India With its Exciting Brand New Series of Smartphones

NEW DELHI, July 7, 2015 /PRNewswire/ --

    - Exciting Range of Value for Money Smartphones That Will be Available in the Offline
Market Across 1000 Stores  

    - Launches Four new Smartphones - Huawei Y336, Y541, Y625 and G620S  

    Huawei, the world number 3 smartphone manufacturer, today announced its expansion in
the Indian retail market with the launch of a new smartphones series. Bullish to expand
its presence in the Indian smartphone market, the global smartphone major is all set to
replicate the global strategy in India to keep up with its global number 3rd position.

    Following the dual brand global strategy of Huawei, the company will now also be
offering a wide range of its Huawei branded smartphones via retail route alongside the
recently launched smartphones under the brand Honor. Honor, the leading global ebrand,
would continue to sell through online marketplaces while Huawei, known for its technology
prowess and association with premium and high tech smartphones would be available through
a robust and strong retail distribution network.

    Newly launched Huawei Y336, Y541, Y625 and G620S will be available under its G & Y
series between the price range of Rs. 5,499 - Rs. 9,499. These smartphones come equipped
with the best-in-class technology at the most value-for-money price ranges. The latest G &
Y series have clocked huge global targets and the company is expecting the same in India.
The devices will be marketed through the company's offline distributors across 1000 stores
in the initial phase thereby flooding the mid segment market with these affordable and
best-in-class product offering.

    At the price points that it operates, G & Y series smartphones are a cut above the
competition and come power-packed with multimedia features and strong hardware to cater to
the consumers looking at value for money with the benefit of good specifications. With
this new range, Huawei phones boast of improved camera features like dual LED flash,
patented power saving technology for extended battery life and unmatched features at this
price point. The mid segment smartphone launch would be followed close on heels with the
launch of Huawei's global premium range.

    "After the global success in the first half of 2015 with our smartphones sales
crossing 50 million units, making us global number 3, we are excited to launch our 'Huawei
Brand' series in India. The good news is that the new series will be available through the
retail route where our customers can experience the products first hand. Keeping in mind
the value proposition and commitment we offer to our consumers, Huawei is rapidly
strengthening its after sales network to serve them better," said Mr. Allen Wang,
President of Consumer Business Group, Huawei Telecommunications India.

    "To reach out to our consumers in key markets, Huawei range would be available through
a strong distribution network in offline retail beginning with a 1000 stores roll out in
the next 4-8 weeks. For the brand new series, we will be strengthening our presence with
traditional multi-brand retailers and by partnering with top modern trade players such as
Croma, Reliance Digital, Sangeetha Retail and The Mobile Store in key cities like Delhi,
Bangalore and Chennai amongst others," said Mr. P Sanjeev, Director Sales (Devices
Business), Huawei Telecommunications India.

    This testifies Huawei's commitment towards India and market localization. Focused on
innovation led with solutions, Huawei invests heavily in R&D. The Bangalore city houses
Huawei's largest R&D centre outside China and Global Network Operations Centre (GNOC). The
company owns more than 15,000 device patents out of which over 60% are for smartphones.

    About Huawei  

    By 2014, Huawei's products and services have covered more than 170 countries, and a
third of the world's population. Huawei's shipments of smartphones have been ranked third
in the world in 2014. Huawei has 16 R&D centers set up in the US, Germany, Sweden, Russia,
India, and China. Huawei Consumer Business Group is one of three businesses within Huawei,
covering smartphones, mobile broadband devices, home devices and cloud services. Based on
more than 20 years of Huawei's expertise in the telecom industry, built on Huawei's global
network, worldwide operations and business partners, Huawei Consumer Business Group is
dedicated to providing the latest technology to the consumers and bringing the joy of
technological advances to people all around the world. Huawei acts on its word and
fulfills dreams.

    For more information on the newly launched smartphones, visit: G620s
[http://www.huaweidevice.co.in/?q=huawei-G620s ], Y625
[http://www.huaweidevice.co.in/?q=huawei-y625 ], Y541
[http://www.huaweidevice.co.in/?q=huawei-y541 ], Y336
[http://www.huaweidevice.co.in/?q=huawei-y336 ]

       
         
        Media Contact: 
        Anish Bangia 
        anish.bangia@fleishman.com 
        +91-9911104244 
        Account Manager 
        Fleishman Hillard 

     

Huawei India

Fujitsu Debuts the World's Most Scalable and Powerful Storage Systems

SUNNYVALE, California, July 7, 2015 /PRNewswire/ --

    Fujitsu is enabling enterprises to push beyond the boundaries of unpredictable data
growth into the double-digit petabyte range, with the introduction of the new FUJITSU
Storage ETERNUS DX8700 S3 and DX8900 S3. Massively scalable, the new flagship of the
ETERNUS DX family is purpose-built for enterprises that demand outstanding storage peak
performance of up to 4 million Input/Output Operations per Second (IOPS) and a huge
capacity of up to 14 petabytes, paired with enterprise-class resiliency and always-on
availability.

         (Photo:
http://photos.prnewswire.com/prnh/20150630/227264 )

    Fujitsu's new enterprise storage systems are also differentiated by unique automation
and zero-downtime functions that set a new milestone in business-critical storage by
guaranteeing maximum system utilization and contributing to a faster return on investment.
With automated quality of service management, system performance levels can be allocated
according to business priorities. This technology can also be used to support service
level management for virtual servers. The brand new system architecture can cope with
multiple component failures without any interruption to service. In conjunction with the
unique transparent failover feature - ETERNUS Storage Cluster
[http://www.fujitsu.com/global/products/computing/storage/disk/eternus-dx/feature/failover.html ]
- non-stop operation despite a complete system or site failure is guaranteed.

    Kenichi Sakai, Senior Vice President and Head of Enterprise System Business Unit at
Fujitsu, says: "Fujitsu is taking the lead in enterprise storage by delivering new
dimensions of scalability, flexibility, automation and business continuity to underpin
business-centric storage services. The new top-of-the-range systems, ETERNUS DX8700 S3 and
ETERNUS DX8900 S3, are packed with innovations that will improve data management combined
with greater efficiency resulting in future-proof platforms for storage consolidation in
the data center."

    The ETERNUS DX8700 S3 and DX8900 S3 solutions are perfect for consolidating data all
into one system, such as online transaction processing (OLTP) and large-scale databases,
file services, business-critical applications and business analytics and/or Big Data. They
also provide ample capacity for any demanding virtualization environments. Extensive
high-availability and disaster recovery capabilities make ETERNUS DX enterprise models the
ideal storage systems for all business-critical data, and they fit perfectly in the
private and public cloud environments of large-scale enterprises and service providers.

    Pricing and availability 

    The FUJITSU Storage ETERNUS DX8700 S3 and DX8900 S3 will be globally available from
August 1, 2015 via direct sales and certified channel partners. Prices vary by
configuration and region.

    Read the full release at:

http://www.fujitsu.com/us/about/resources/news/press-releases/2015/fai-20150701.html

       
         
        Media contacts 
        Bryan Hollar 
        Phone: +1-408-746-6412 
        E-mail: bryan.hollar@us.fujitsu.com  
        Company: Fujitsu America, Inc. 

     

    About Fujitsu: http://www.fujitsu.com/us/about

    Photo:
    http://photos.prnewswire.com/prnh/20150630/227264

Photo:http://photos.prnewswire.com/prnh/20150630/227264
http://photoarchive.ap.org/
Fujitsu

International® Truck Launches Industry's First Telematics Credit For OnCommand Connection

OnCommand(TM) Connection, Telematics Hardware and Two Years of Data Service Included

LISLE, Ill., July 7, 2015 /PRNewswire/ -- International(®) Truck today announced the industry's first telematics credit, available through approved, integrated telematics providers--effective immediately. The telematics hardware and a two-year data plan from one of several providers will be standard and available at no cost to the customer through this program. Hardware and data from the other telematics service provider partners will be partially covered by this program. The credit bundle goes into effect on new orders placed since July 1, 2015 in the U.S. and Canada, and will be available to customers buying directly through the International Truck dealer organization. 

http://photos.prnewswire.com/prnvar/20120127/MM32830LOGO-d

"The commitment to invest in the telematics and remote diagnostics bundle represents our continued commitment to increase our customers' uptime and lower their operating costs--today," said Jeff Sass, Navistar senior vice president, North America Truck Sales and Marketing. "We feel it is our responsibility to make OnCommand(TM) Connection and remote diagnostics available to everyone, so we took the initiative to offer a technology bundle with a portfolio of telematics providers our customers already know and trust."

The telematics bundle credit is an important part of International Truck's commitment to uptime. Remote diagnostics and vehicle management through the OnCommand Connection portal is a key factor in turning unscheduled downtime into planned, routine maintenance. In addition, OnCommand Connection enables the company's dealer network visibility into vehicle health in order to be proactive in facilitating maintenance and repairs.

"This bundled approach removes the barriers to entry and gives non-telematics customers access to the power of OnCommand Connection," said Mike Cerilli, vice president and general manager, Navistar Connected Vehicle Business. "We have customers across the U.S. and Canada already experiencing the real-world benefits of OnCommand Connection and this bundle extends the offer to everyone."

About Navistar

Navistar International Corporation (NYSE: NAV) is a holding company whose subsidiaries and affiliates produce International(®) brand commercial and military trucks, proprietary diesel engines, and IC Bus((TM)) brand school and commercial buses. An affiliate also provides truck and diesel engine service parts. Another affiliate offers financing services. Additional information is available at http://www.Navistar.com.

Logo - http://photos.prnewswire.com/prnh/20120127/MM32830LOGO-d

SOURCE  International Truck

Photo:http://photos.prnewswire.com/prnh/20120127/MM32830LOGO-d
http://photoarchive.ap.org/
International Truck

CONTACT: Media Contact: Lyndi McMillan, 331-332-3181; Investor Contact: Kevin Sadowski, 331-332-2406; Web site: http://www.Navistar.com/newsroom

Web Site: http://www.Navistar.com

Gimbal, Inc. Expands Product Line with Introduction of USB-Powered Proximity Beacons

Gimbal Proximity Beacon U-Series 5 Adds Proximity Functionality to Any Device with a Standard USB Port

SAN DIEGO, July 7, 2015 /PRNewswire/ -- Gimbal, Inc., the leader in location and proximity-based mobile engagement, today announced the availability of its Bluetooth® Smart (Bluetooth Low Energy) Gimbal Proximity Beacon U-Series 5(TM). The hardware serves as a low-cost, low-maintenance solution that adds beacon functionality to traditional devices with USB ports, including computers, TVs, set-top-boxes, kiosks, point-of-sale terminals, vending machines, automated dispensers and more.

The U-Series 5 beacon leverages Gimbal's deep understanding of antennae design and beacon firmware to create the smallest Gimbal Proximity Beacon to date. Additionally, the U-Series 5 beacon with iBeacon(TM) technology offers a simple, battery-free option backed with Gimbal's leading security and comprehensive management tools. The U-Series 5 enables a host of new devices to power smart, proximity-triggered engagements to an opted-in user's mobile device and for retailers, venues and other beacon-enabled locations to further extend their proximity network. Gimbal Proximity Beacon U-Series 5 are available at https://store.gimbal.com.

"The main benefit of the USB form factor is the flexibility our customers now have to enable their existing devices with beacon functionality. Packaging it in a small, battery-free option allows for hassle-free maintenance and makes the solution additionally attractive for large deployments," said Kevin Hunter, chief operating officer of Gimbal, Inc. "U-Series 5 beacons provide an easy and affordable solution to engage mobile audiences and bring proximity-based technology to an even broader footprint to further bridge the digital and physical worlds."

With Gimbal's industry-leading security in mind, the U-Series 5 does not have USB data lines connected, which means it can safely be plugged into a powered USB port in a computer, point-of-sale register, ATM or other device with no risk of sending or receiving any data.

Gimbal's extended product line continues to combine leading hardware design and beacon firmware with comprehensive, enterprise-grade management tools to create the best digital to physical bridge and enhance location and proximity-triggered mobile engagements. Gimbal has earned TRUSTe certification for consumer-controlled privacy, and is a member of the Future of Privacy Forum.

For more information, or to purchase Gimbal Proximity Beacon U-Series 5, please visit http://store.gimbal.com.

About Gimbal, Inc.
Gimbal, Inc. is connecting brands, venues, events and retailers with their customers in exciting new ways by providing leading-edge mobile technologies and solutions.  With advanced geofencing, the world's largest deployment of industry-leading Bluetooth Smart beacons, location-based engagement, analytics, unmatched security features and privacy controls, the Gimbal platform helps drive mobile app engagement and loyalty. Visit http://www.gimbal.com for more information.

Gimbal is a trademark of Gimbal, Inc.  iBeacon is a trademark of Apple. Bluetooth is a registered trademark owned by Bluetooth SIG, Inc.  Other product and brand names may be trademarks or registered trademarks of their respective owners.

SOURCE  Gimbal, Inc.

Gimbal, Inc.

CONTACT: Press contacts: press@gimbal.com

Web Site: http://www.gimbal.com

Tryten Introduces iPad Pivot Floor Stand for Practical, Functional Security of Valuable Technology

SEATTLE, July 7, 2015 /PRNewswire/ -- The iPad Pivot Floor Stand is the latest innovation from Tryten Technologies, the company that has provided simple, reliable security solutions for tech hardware for over two decades. More information about this inventive new product is available at http://tryten.com/ipad-pivot-floor-stand.

Photo - http://photos.prnewswire.com/prnh/20150706/230718
Photo - http://photos.prnewswire.com/prnh/20150706/230719

"Electronic devices in public spaces will always be at risk for damage or targets for theft. Despite remarkable advances in design and construction, they're still vulnerable to physical damage," explained Tryten's Business Development Manager, Cameron Scott. "Our goal with the iPad Pivot Stand was to provide our customers with a simple and affordable solution that meets the security, durability, and functionality requirements many of our customers have asked for."

The iPad Pivot Floor Stand fits iPads 2, 3, 4, Air 1, and Air 2. Available in black or white, the stand is constructed of high-grade steel with a satin powder coat finish. The surface is both easy to clean and scratch-resistant, making it ideal for public spaces where rigorous use is anticipated. Meanwhile, the understated but elegant design means the stand is versatile enough to fit well in any environment. Charging cables are discreetly hidden inside the stand so that the device will maintain full charge without presenting a trip hazard or being unsightly.

The function of the iPad Pivot Floor Stand is to allow for safe interaction with a company's products and services via a securely mounted but fully functional iPad. A VESA mounting system makes the stand compatible with other VESA devices, whereas the pivot enables wide panning and full rotation. Customers can quickly rotate the iPad to any preferred viewing aspect.

To prevent anyone from taking off with the device, the iPad Pivot Floor Stand has a tubular pin lock that is both pick resistant and easy to operate. Comprised of only a few parts and requiring basic tools, anyone can assemble the stand in no more than 5 minutes.

Tryten works with customers in healthcare, education, government and enterprise to deliver solutions that meet their essential needs; industry discounts on bulk orders are available. The company's sales and customer service teams hold themselves to a high standard, with quotes delivered to prospective clients in 20 minutes or less.

The iPad Pivot Floor Stand comes with a lifetime limited warranty against defects in workmanship or materials. The company will repair or replace any items that show such defects. The warranty does not extend to misuse, shipping damage, improper care or damage resulting from customer modifications.

Backing up its warranty, Tryten puts each of its products through a meticulous set of paces to ensure nothing leaves the manufacturing facility in less-than-perfect condition. Strength testing, line inspections and a dedication to continual iteration are how the company has maintained its high standards for over two decades.

Tryten has engineered effective and innovative solutions to the problem of physical security of technology for more than 20,000 multinational clients. The company has deftly solved problems for clients across a host of industries, including Apple, Google, Coca Cola, Delta Airlines, Harvard and Kaiser Permanente. The company endeavors to design intelligent products that make life simpler for clients, and the iPad Pivot Floor Stand is another excellent example.

About Tryten Technologies, Inc.

Tryten is a leader in the design and manufacturing of high-end locks, mounts, kiosks and enclosures for technology. For over 20 years, Tryten has been providing clients with innovative and customized solutions to secure these valuable assets.

Contact:

Cameron Scott
Tryten US Headquarters
800 Fifth Avenue, Suite 4100
Seattle, WA 98104
1-800-860-4455 
Email

SOURCE  Tryten Technologies, Inc.

Photo:http://photos.prnewswire.com/prnh/20150706/230718
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20150706/230719
http://photoarchive.ap.org/
Tryten Technologies, Inc.

Highpower International Granted U.S. Patent for New Safety Technology

Highpower Now Has Been Granted a Total of 149 Patents

SAN FRANCISCO and SHENZHEN, China, July 7, 2015 /PRNewswire/ -- Highpower International, Inc. (NASDAQ: HPJ), ("Highpower," or the "Company") a developer, manufacturer, and marketer of lithium and nickel-metal hydride (Ni-MH) rechargeable batteries, and a battery management systems and battery recycling provider, today announced that the U.S. Patent and Trademark Office has granted a patent for Highpower's safety technology on rechargeable battery. This technology relates to a structural innovation to improve safety features. The patent number is US13/673634.

Safety remains a critical issue for the entire battery industry. Highpower's safety-enhanced rechargeable battery consists of a shell, anode cap, sealing ring and a separating structure that ensures safe and efficient venting in the event of excessive internal air pressure inside the battery. Highpower's proprietary design was created and submitted after extensive research and development efforts. 

Mr. Wenliang Li, Chief Technology Officer of Highpower International, stated, "Patents represent a company's ability to innovate and protect intellectual property, which in turn strengthen the core competence of a company. Highpower has always placed an emphasis on innovation, and has been granted in total 149 patents in China and the United States. This invention patent, authorized by the U.S. Patent and Trademark Office, serves as a milestone event as well as international recognition for our technology. Our safety-enhanced rechargeable battery has gone through rigorous experimentation and testing. We expect to achieve more technological breakthroughs, and to make such technologies applicable and practical, and eventually deliver more safe and powerful battery products to consumers worldwide."

About Highpower International, Inc.   

Highpower International was founded in 2001 and produces high-quality Nickel-Metal Hydride (Ni-MH) and lithium-based rechargeable batteries used in a wide range of applications such as electric buses, bikes, energy storage systems, power tools, medical equipment, digital and electronic devices, personal care products, and lighting. Highpower's target customers are Fortune 500 companies, and top 10 companies in each vertical segment. With advanced manufacturing facilities located in Shenzhen, Huizhou, and Ganzhou, China, Highpower is committed to clean technology, not only in the products it makes, but also in the processes of production. The majority of Highpower International's products are distributed to worldwide markets mainly in the United States, Europe, China and Southeast Asia.

Forward Looking Statements

This press release contains "forward-looking statements" within the meaning of the "safe-harbor" provisions of the Private Securities Litigation Reform Act of 1995 that are not historical facts. These statements  can be identified by the use of forward-looking terminology such as "believe," "expect," "may," "will," "should," "project," "plan," "seek," "intend," or "anticipate" or the negative thereof or comparable terminology, and include discussions of the Company's future performance, operations and products. Such statements involve known and unknown risks, uncertainties and other factors that could cause the Company's actual results to differ materially from the results expressed or implied by such statements, including, our ability to successfully expand sales of our lithium battery product in the mobile device market and our ability to effectively compete in that market. For a discussion of these and other risks and uncertainties see "Risk Factors "and "Management's Discussion and Analysis of Financial Condition and Results of Operations" in the Company's public filings with the SEC. Although the Company believes that the expectations reflected in such forward-looking statements are reasonable, there can be no assurance that such expectations will prove to be correct. The Company has no obligation to update the forward-looking information contained in this press release.

CONTACT:
Highpower International, Inc.
Sherry Chen
+86-755-8968-6521
ir@highpowertech.com

INVESTOR RELATIONS:
The Equity Group Inc.
In China
Katherine Yao, Associate
+86-10-6587-6435
kyao@equityny.com

In U.S.
Adam Prior, Senior Vice President
+1 (212) 836-9606
aprior@equityny.com

SOURCE  Highpower International, Inc.

Highpower International, Inc.

TASER Launches Free Evidence.com Solution For Prosecutors

The First Circuit of Florida State Attorney's Office Secures 250 Licenses to Better Manage Influx of Data from Body-Worn Cameras

SEATTLE, July 7, 2015 /PRNewswire/ -- TASER International (NASDAQ: TASR) announces Evidence.com for prosecutors, a new platform that enables prosecutors to manage any type of digital evidence shared from their law enforcement partners for free on a Standard License. The First Circuit of Florida State Attorney's Office has signed a five year contract for 250 prosecutor licenses, which will allow them to better manage the tidal wave of digital evidence that is being generated from police body cameras and other digital devices.

https://photos.prnewswire.com/prnvar/20150707/231466LOGO

Through early trials, more than 7 terabytes of data from more than 8,000 cases have been shared between prosecutors and local police agencies on the Evidence.com platform. With the Standard Prosecutor License prosecutors receive free unlimited data storage for all evidence shared with them, which allows jurisdictions to experience the full benefits of body-worn video while minimizing the technical challenges posed by new forms of evidence. In addition to receiving digital evidence from law enforcement, prosecutors will be able to electronically provide discovery and enact their own retention policies and audit controls. Available for $39 per user per month, prosecutors can purchase a Pro License, which unlocks premium features like redaction, advanced reporting, and other enterprise features.

"Prosecutors are increasingly faced with a flood of digital evidence that needs to be managed from capture to courtroom as more police departments adopt body cameras," says Marcus Womack, General Manager of TASER's Axon business. "The solution we've created for Evidence.com is uniquely positioned to facilitate collaboration between government agencies and District Attorneys' Offices and ultimately make the discovery process more efficient and secure."

A recent study conducted in Newport News, Virginia found that the combination of Axon cameras and Evidence.com could have profound effects on the efficacy and efficiency of attempts to prosecute wrongdoers.  Specifically, the study found that, when video evidence was available, the percentage of guilty pleas entered in DUI cases rose from 70% to 89%.  The study estimated that each additional guilty plea saved officers a total of more than three hours of court time, thereby saving the taxpayers significant sums of money.  Moreover, nearly a third of guilty pleas were entered prior to the defendant's scheduled court date, thereby relieving officers of the need to appear in court at all.  Prosecutors at the Commonwealth's Attorney's Office identified video evidence as an important factor in 70% of DUI cases.

Follow the TASER and Axon brand here:

    --  Axon on Facebook: https://www.facebook.com/pages/Axon/117780381886687
    --  TASER on Facebook: https://www.facebook.com/TASER.International
    --  Axon on Twitter: https://twitter.com/AxonTechnology
    --  TASER on Twitter: https://twitter.com/OfficialTASER
About TASER International, Inc.

TASER International makes communities safer with innovative public safety technologies. Founded in 1993, TASER first transformed law enforcement with its electrical weapons. TASER continues to define smarter policing with its Axon brand which includes a growing suite of connected products and services from body cameras and digital evidence management tools to mobiles apps. More than 151,000 lives and countless dollars have been saved with TASER's products and services. Learn more at http://www.TASER.com and http://www.EVIDENCE.com or by calling (800) 978-2737.

TASER® is a registered trademark of TASER International, Inc., registered in the U.S. All rights reserved. TASER logo and AXON are trademarks of TASER International, Inc.

Note to Investors

Please visit http://investor.taser.com, http://www.twitter.com/taser_ir, http://www.twitter.com/officialtaser and https://www.facebook.com/TASER.International where TASER discloses information from time to time about the company, its financial information, and its business.

Visit our Investor Relations Safe Harbor Statement at: http://investor.taser.com/safeHarbor.cfm

For investor relations information please contact Erin Curtis by phone at 480-515-6330 or via email at IR@TASER.com.

CONTACT:

Sydney Siegmeth

PR Director
EVIDENCE.com
Press@TASER.com

http://photos.prnewswire.com/prnvar/20150106/167195LOGO

Logo - http://photos.prnewswire.com/prnh/20150707/231466LOGO

Logo - http://photos.prnewswire.com/prnh/20150106/167195LOGO

SOURCE  TASER International, Inc.

Photo:https://photos.prnewswire.com/prnh/20150707/231466LOGO
http://photoarchive.ap.org/
Photo:http://photos.prnewswire.com/prnh/20150106/167195LOGO
http://photoarchive.ap.org/
TASER International, Inc.

CONTACT: Media ONLY Hotline: (480) 444-4000

Web Site: http://www.taser.com

Comal County, Texas Updates Election Technology with Purchase of Hart InterCivic Solution

AUSTIN, Texas, July 7, 2015 /PRNewswire/ -- Comal County, Texas has purchased a new election solution and switched from their current vendor to Hart InterCivic, enabling the County to significantly reduce costs and increase overall election efficiency.

https://photos.prnewswire.com/prnvar/20150706/231005LOGO

Key Facts

    --  Comal County will save considerably in election programming, ballot
        printing, and preventative maintenance costs. They will also save
        significantly on their annual license and support fees.
    --  With the purchase of the Hart solution, the County will provide voters
        with added privacy; voters will be able to select any open voting booth
        to carefully choose their ballot selection and cast their vote.
    --  County poll workers will be able for the first time to open polls,
        assign ballots, close polls, and consolidate reports for all the voting
        machines at one time using polling place controllers. This process will
        help to accelerate the County's reporting of election results.
    --  The County's electronic poll book and the Hart election solution will be
        fully-integrated, helping to automate ballot style selection, reduce
        errors and speed up the voter line on Election Day.
    --  The new devices are smaller and lighter, so they will be easier to
        transport and store; reducing the County's carbon footprint and
        warehousing needs.
    --  The Hart voting devices do not require calibration; therefore, the
        County will no longer need to be concerned with calibration issues or
        the possibility that a machine could misinterpret a voter's selection.
Quotes

Phillip Braithwaite, President and CEO of Hart InterCivic, said, "The Hart election solution provides Comal County with a complete overhaul of their current outdated election technology. Comal County voters, poll workers and election staff will benefit from the Hart election solution. We are pleased to offer the County the most secure, accurate and reliable system currently certified by the Texas Secretary of State. The Hart solution will prove to be a great long-term investment for the County. We welcome Comal County to the Hart family and look forward to a positive on-going relationship."

About Hart InterCivic, Inc.

Hart InterCivic is a full service election solutions innovator, partnering with state and local governments to deliver secure, accurate and reliable elections. Working side by side with election professionals for more than 100 years, we share our customers' dedication to ensuring the sanctity of the vote. Our mission is to help advance democracy one election at a time. This mission fuels our passionate customer focus and our continuous drive for technological innovation that makes voting more straightforward, more equitable and more accessible--and makes managing elections more transparent, more efficient and easier.

Headquartered in the vibrant city of Austin, Texas Hart InterCivic fosters an environment that spurs innovation and empowers employees to deliver great experiences to our customers.

Logo - http://photos.prnewswire.com/prnh/20150706/231005LOGO

SOURCE  Hart InterCivic, Inc.

Photo:https://photos.prnewswire.com/prnh/20150706/231005LOGO
http://photoarchive.ap.org/
Hart InterCivic, Inc.

CONTACT: Media Contact, Steven Sockwell, 512.252.6409, media@hartic.com

Web Site: http://www.hartintercivic.com/